Communication TheoryCommunication Theory

How a message rides on a signal: spectrum, AM, FM, sampling, PCM, line coding, digital modulation, noise, channel capacity and multiplexing. একটা message কীভাবে signal-এর উপর চড়ে যায়: spectrum, AM, FM, sampling, PCM, line coding, digital modulation, noise, channel capacity আর multiplexing।

IICT note: This chapter is for the BUET IICT admission test (MSc in ICT / MSc in Information Security). Communication Theory comes in the compulsory MCQ test and in both written tests. So learn the ideas for MCQ, and practice the calculations for the written part.
IICT note: এই chapter BUET IICT admission test-এর জন্য (MSc in ICT / MSc in Information Security)। Communication Theory আসে compulsory MCQ test-এ এবং দুইটা written test-এই। তাই MCQ-এর জন্য idea গুলো বুঝুন, আর written part-এর জন্য calculation গুলো হাতে-কলমে practice করুন।

1. Signals and Spectrum1. Signal এবং Spectrum

A signal is anything that carries information and changes with time. Your voice is a signal. The voltage on a phone wire is a signal. The light in a fiber cable is a signal. Communication theory is the study of how we send these signals from one place to another, and how we fight noise on the way.

A basic communication system has 3 parts: a transmitter (prepares the signal), a channel (wire, air, fiber — noise gets added here), and a receiver (gets the message back).

Signal হলো এমন কিছু যা information বহন করে এবং সময়ের সাথে বদলায়। আপনার কণ্ঠস্বর একটা signal। Phone-এর তারের voltage একটা signal। Fiber cable-এর ভেতরের আলোও একটা signal। Communication theory পড়ে কীভাবে এই signal এক জায়গা থেকে আরেক জায়গায় পাঠানো যায়, আর পথে noise-এর সাথে কীভাবে লড়াই করা যায়।

একটা basic communication system-এর 3টা অংশ: transmitter (signal তৈরি করে), channel (তার, বাতাস, fiber — এখানেই noise যোগ হয়), আর receiver (message ফেরত বের করে)।

Analog vs digital signalsAnalog বনাম digital signal

An analog signal can take any value in a range, and it changes smoothly (like a sine wave or your voice). A digital signal can take only a few fixed values (like 0 V and 5 V for bits 0 and 1). It jumps from one level to another.

Analog signal একটা range-এর মধ্যে যেকোনো value নিতে পারে, আর মসৃণভাবে বদলায় (যেমন sine wave বা আপনার কণ্ঠ)। Digital signal শুধু কয়েকটা নির্দিষ্ট value নিতে পারে (যেমন bit 0 আর 1-এর জন্য 0 V আর 5 V)। এটা এক level থেকে আরেক level-এ লাফ দেয়।

Featureবৈশিষ্ট্য Analog Digital
ValuesValue Infinite (continuous)অসীম (continuous) Finite (discrete levels)সীমিত (discrete level)
Effect of noiseNoise-এর প্রভাব Noise adds up; hard to removeNoise জমতে থাকে; দূর করা কঠিন Can be regenerated by a repeaterRepeater দিয়ে আবার নতুন করে তৈরি (regenerate) করা যায়
Exampleউদাহরণ Voice, old AM/FM radioকণ্ঠস্বর, পুরনো AM/FM radio Computer data, PCM, EthernetComputer data, PCM, Ethernet
Bandwidth needBandwidth লাগে Usually lessসাধারণত কম Usually more (sharp edges need many harmonics)সাধারণত বেশি (ধারালো edge-এর জন্য অনেক harmonic লাগে)

Periodic signals: amplitude, frequency, period, phasePeriodic signal: amplitude, frequency, period, phase

A periodic signal repeats itself again and again after a fixed time. That fixed time is the period T (in seconds). The number of repeats in one second is the frequency f (in hertz, Hz). The height of the wave is the amplitude A. The starting position of the wave is the phase φ.

Periodic signal একটা নির্দিষ্ট সময় পরপর বারবার একই রকম হয়। ওই নির্দিষ্ট সময়টাই period T (second-এ)। এক second-এ কতবার repeat হয়, সেটা frequency f (hertz, Hz-এ)। Wave-এর উচ্চতা হলো amplitude A। Wave কোথা থেকে শুরু হচ্ছে, সেটা phase φ।

\[ s(t) = A \sin(2\pi f t + \phi), \qquad T = \frac{1}{f}, \qquad \omega = 2\pi f \]
Example: Bangladesh power supply is 50 Hz. So the period is \( T = 1/50 = 0.02 \) s \( = 20 \) ms. A 1 kHz tone has \( T = 1 \) ms. A signal with period 5 µs has \( f = 1/(5\times10^{-6}) = 200 \) kHz.
Example: বাংলাদেশের বিদ্যুৎ supply 50 Hz। তাই period হলো \( T = 1/50 = 0.02 \) s \( = 20 \) ms। 1 kHz tone-এর \( T = 1 \) ms। যে signal-এর period 5 µs, তার \( f = 1/(5\times10^{-6}) = 200 \) kHz।
Example (reading ω): \( s(t) = 4\sin(2000\pi t) \). Here \( \omega = 2000\pi \), so \( f = \omega / 2\pi = 1000 \) Hz. Amplitude = 4, phase = 0. Many students wrongly say f = 2000 — always divide by \( 2\pi \).
Example (ω পড়া): \( s(t) = 4\sin(2000\pi t) \)। এখানে \( \omega = 2000\pi \), তাই \( f = \omega / 2\pi = 1000 \) Hz। Amplitude = 4, phase = 0। অনেক student ভুল করে f = 2000 বলে — সবসময় \( 2\pi \) দিয়ে ভাগ করবেন।

WavelengthWavelength

Wavelength λ is the distance the wave travels in one period. Radio waves and light move at \( c = 3\times10^8 \) m/s in free space.

Wavelength λ হলো এক period-এ wave যতটা দূরত্ব যায়। Free space-এ radio wave আর আলো \( c = 3\times10^8 \) m/s বেগে চলে।

\[ \lambda = \frac{c}{f} = c \cdot T \]
Example:
  • FM radio at 100 MHz: \( \lambda = 3\times10^8 / 10^8 = 3 \) m.
  • AM radio at 1 MHz: \( \lambda = 300 \) m.
  • Wi-Fi at 2.4 GHz: \( \lambda = 3\times10^8 / 2.4\times10^9 = 0.125 \) m = 12.5 cm.
Higher frequency means shorter wavelength. This is why a phone antenna is small but an AM radio tower is very tall.
Example:
  • 100 MHz-এর FM radio: \( \lambda = 3\times10^8 / 10^8 = 3 \) m।
  • 1 MHz-এর AM radio: \( \lambda = 300 \) m।
  • 2.4 GHz-এর Wi-Fi: \( \lambda = 3\times10^8 / 2.4\times10^9 = 0.125 \) m = 12.5 cm।
Frequency যত বেশি, wavelength তত ছোট। এই কারণেই mobile phone-এর antenna ছোট, কিন্তু AM radio tower অনেক উঁচু।

Time domain vs frequency domain, and bandwidthTime domain বনাম frequency domain, এবং bandwidth

We can look at a signal in two ways:

  • Time domain: amplitude vs time. This is what an oscilloscope shows.
  • Frequency domain: amplitude vs frequency. This shows which frequencies are inside the signal. A spectrum analyzer shows this. A pure sine wave is just one spike in the frequency domain.

The spectrum of a signal is the set of all frequencies it contains. The bandwidth is the width of that range:

একটা signal-কে আমরা দুইভাবে দেখতে পারি:

  • Time domain: amplitude বনাম time। Oscilloscope এটাই দেখায়।
  • Frequency domain: amplitude বনাম frequency। Signal-এর ভেতরে কোন কোন frequency আছে, এটা দেখায়। Spectrum analyzer এটা দেখায়। একটা pure sine wave frequency domain-এ শুধু একটা spike।

একটা signal-এ যত frequency আছে, সবগুলো মিলে তার spectrum। আর ওই range কত চওড়া, সেটাই bandwidth:

\[ B = f_{\text{highest}} - f_{\text{lowest}} \]
Example: A signal has components at 100, 300, 500, 700 and 900 Hz. Bandwidth \( B = 900 - 100 = 800 \) Hz. A telephone voice channel carries 300 Hz to 3400 Hz, so \( B = 3100 \) Hz = 3.1 kHz.
Example: একটা signal-এ 100, 300, 500, 700 আর 900 Hz-এর component আছে। Bandwidth \( B = 900 - 100 = 800 \) Hz। Telephone voice channel 300 Hz থেকে 3400 Hz বহন করে, তাই \( B = 3100 \) Hz = 3.1 kHz।

Fourier series: a square wave is a sum of sine wavesFourier series: square wave আসলে অনেকগুলো sine wave-এর যোগফল

Fourier showed that any periodic signal can be written as a sum of sine waves. The lowest one is the fundamental (frequency f). The others are harmonics at 2f, 3f, 4f, ... For a square wave, only the odd harmonics (f, 3f, 5f, ...) are present, and their size falls as 1/n:

Fourier দেখিয়েছেন যে যেকোনো periodic signal-কে অনেকগুলো sine wave-এর যোগফল হিসেবে লেখা যায়। সবচেয়ে ছোট frequency-টা হলো fundamental (frequency f)। বাকিগুলো হলো 2f, 3f, 4f, ...-এ থাকা harmonic। Square wave-এ শুধু odd harmonic (f, 3f, 5f, ...) থাকে, আর তাদের size 1/n হারে কমে:

\[ x_{\text{square}}(t) = \frac{4A}{\pi}\left[ \sin\omega t + \frac{1}{3}\sin 3\omega t + \frac{1}{5}\sin 5\omega t + \frac{1}{7}\sin 7\omega t + \cdots \right] \]
Fundamental only (f)f + 3ff + 3f + 5f + 7f + 9fFrequency domainf13f1/35f1/57f1/79f1/9only odd harmonics, amplitude 1/n
Adding more odd harmonics makes the sum look more like a square wave (left). The spectrum has spikes only at odd multiples of f, each of height 1/n (right).যত বেশি odd harmonic যোগ করা হয়, যোগফল তত বেশি square wave-এর মতো দেখায় (বাঁয়ে)। Spectrum-এ শুধু f-এর odd গুণিতকে spike থাকে, প্রতিটার উচ্চতা 1/n (ডানে)।
Example: A 1 kHz square wave has harmonics at 1, 3, 5, 7, ... kHz. If a channel passes only up to the 5th harmonic, it must pass 1 kHz to 5 kHz, so we need \( B = 5 - 1 = 4 \) kHz. With fewer harmonics, the corners of the square wave become round.
Link to data: a bit stream 1010... at \( N \) bps looks like a square wave of frequency \( N/2 \). So 1 Mbps needs at least about 500 kHz just for the fundamental. More bandwidth gives sharper bits.
Example: 1 kHz square wave-এর harmonic থাকে 1, 3, 5, 7, ... kHz-এ। যদি channel শুধু 5th harmonic পর্যন্ত pass করে, তবে 1 kHz থেকে 5 kHz pass করতে হবে, তাই \( B = 5 - 1 = 4 \) kHz লাগবে। Harmonic কম হলে square wave-এর কোণাগুলো গোল হয়ে যায়।
Data-র সাথে সম্পর্ক: \( N \) bps-এর 1010... bit stream দেখতে \( N/2 \) frequency-র square wave-এর মতো। তাই 1 Mbps-এর জন্য শুধু fundamental পাঠাতেই অন্তত প্রায় 500 kHz লাগে। Bandwidth বেশি হলে bit গুলো বেশি ধারালো হয়।

Decibels (dB)Decibel (dB)

Signal powers can be very large or very small. So we use a log scale called the decibel (dB). It turns multiply into add, which is very handy for gains and losses.

Signal-এর power অনেক বড় বা অনেক ছোট হতে পারে। তাই আমরা decibel (dB) নামে একটা log scale ব্যবহার করি। এটা গুণকে যোগে বদলে দেয় — gain আর loss হিসাব করতে খুব সুবিধা।

\[ \text{dB} = 10\log_{10}\frac{P_2}{P_1} \qquad \text{dB} = 20\log_{10}\frac{V_2}{V_1} \qquad \text{dBm} = 10\log_{10}\frac{P}{1\,\text{mW}} \]

Why 20 for voltage? Because power is proportional to \( V^2 \). So \( 10\log(V^2) = 20\log V \). dBm is power compared to 1 mW, so 0 dBm = 1 mW. (dBW compares to 1 W, so 0 dBW = 30 dBm.)

Voltage-এর জন্য 20 কেন? কারণ power \( V^2 \)-এর সমানুপাতিক। তাই \( 10\log(V^2) = 20\log V \)। dBm মানে 1 mW-এর সাথে তুলনা করা power, তাই 0 dBm = 1 mW। (dBW তুলনা করে 1 W-এর সাথে, তাই 0 dBW = 30 dBm।)

Power ratioPower ratio dB Voltage ratioVoltage ratio dB
2≈ 3 dB2≈ 6 dB
1010 dB1020 dB
10020 dB10040 dB
100030 dB100060 dB
0.5≈ −3 dB0.5≈ −6 dB
Worked conversions:
  • An amplifier gets 5 mW and gives 500 mW. Gain = \( 10\log(500/5) = 10\log 100 = 20 \) dB.
  • Input 5 mW, gain 20 dB. Output = \( 5 \times 10^{20/10} = 5 \times 100 = 500 \) mW.
  • A chain: amplifier +10 dB, cable loss −6 dB, amplifier +20 dB. Total = \( 10 - 6 + 20 = 24 \) dB. Just add!
  • 1 W = 1000 mW = \( 10\log 1000 = 30 \) dBm. 20 dBm = \( 10^{2} \) mW = 100 mW. −30 dBm = \( 10^{-3} \) mW = 1 µW.
  • Voltage goes from 1 V to 10 V: gain = \( 20\log 10 = 20 \) dB (not 10 dB).
  • Power drops from 5 W to 2.5 W: \( 10\log 0.5 \approx -3 \) dB. "Half power" = −3 dB.
হাতে-কলমে conversion:
  • একটা amplifier 5 mW পায় আর 500 mW দেয়। Gain = \( 10\log(500/5) = 10\log 100 = 20 \) dB।
  • Input 5 mW, gain 20 dB। Output = \( 5 \times 10^{20/10} = 5 \times 100 = 500 \) mW।
  • একটা chain: amplifier +10 dB, cable loss −6 dB, amplifier +20 dB। মোট = \( 10 - 6 + 20 = 24 \) dB। শুধু যোগ করুন!
  • 1 W = 1000 mW = \( 10\log 1000 = 30 \) dBm। 20 dBm = \( 10^{2} \) mW = 100 mW। −30 dBm = \( 10^{-3} \) mW = 1 µW।
  • Voltage 1 V থেকে 10 V হলো: gain = \( 20\log 10 = 20 \) dB (10 dB নয়)।
  • Power 5 W থেকে 2.5 W-এ নামলো: \( 10\log 0.5 \approx -3 \) dB। "Half power" = −3 dB।
Exam trap: Use 10 log for a power ratio and 20 log for a voltage or current ratio. A voltage gain of 100 is 40 dB, not 20 dB. Also, dB is a ratio (no unit), but dBm is an absolute power level. You can add dB to dBm (20 dBm + 10 dB = 30 dBm), but never add two dBm values directly.
Exam-এর ফাঁদ: Power ratio-র জন্য 10 log, আর voltage বা current ratio-র জন্য 20 log। Voltage gain 100 মানে 40 dB, 20 dB নয়। আরও মনে রাখুন, dB শুধু একটা ratio (কোনো unit নেই), কিন্তু dBm একটা absolute power level। dBm-এর সাথে dB যোগ করা যায় (20 dBm + 10 dB = 30 dBm), কিন্তু দুইটা dBm সরাসরি যোগ করা যায় না।

2. Amplitude Modulation (AM)2. Amplitude Modulation (AM)

Why do we modulate?কেন modulate করি?

Modulation means putting a low-frequency message \( m(t) \) (frequency \( f_m \)) on top of a high-frequency carrier wave (frequency \( f_c \)). We change some property of the carrier (amplitude, frequency or phase) according to the message. Why?

  • Antenna size: A good antenna is about \( \lambda/4 \) long. For a 3 kHz voice, \( \lambda = 3\times10^8/3000 = 100 \) km, so the antenna would be 25 km long! At a 1 MHz carrier, \( \lambda/4 = 75 \) m. Much more practical.
  • Multiplexing: All voices are in the same 0–4 kHz range. If everyone sent them directly, they would mix. Different stations use different carriers (for example 88.0 MHz, 90.4 MHz), so many signals can share the air.
  • Longer range and less noise: High-frequency waves travel better, and some types (FM) fight noise better.

Modulation মানে হলো কম frequency-র একটা message \( m(t) \) (frequency \( f_m \))-কে বেশি frequency-র একটা carrier wave (frequency \( f_c \))-এর উপর বসানো। Message অনুযায়ী carrier-এর কোনো একটা বৈশিষ্ট্য (amplitude, frequency বা phase) বদলানো হয়। কেন?

  • Antenna-র size: ভালো antenna মোটামুটি \( \lambda/4 \) লম্বা হয়। 3 kHz voice-এর জন্য \( \lambda = 3\times10^8/3000 = 100 \) km, তাই antenna হবে 25 km লম্বা! 1 MHz carrier-এ \( \lambda/4 = 75 \) m। অনেক বেশি বাস্তবসম্মত।
  • Multiplexing: সবার voice একই 0–4 kHz range-এ। সবাই সরাসরি পাঠালে সব মিশে যাবে। আলাদা station আলাদা carrier ব্যবহার করে (যেমন 88.0 MHz, 90.4 MHz), তাই অনেক signal একসাথে বাতাস share করতে পারে।
  • বেশি দূরত্ব আর কম noise: High-frequency wave ভালোভাবে দূরে যায়, আর কিছু ধরন (FM) noise-এর বিরুদ্ধে ভালো লড়ে।

The AM equation and modulation indexAM equation এবং modulation index

In AM, the amplitude of the carrier follows the message. For a single-tone message \( A_m\cos(2\pi f_m t) \) and a carrier \( A_c\cos(2\pi f_c t) \):

AM-এ carrier-এর amplitude message-কে অনুসরণ করে। একটা single-tone message \( A_m\cos(2\pi f_m t) \) আর carrier \( A_c\cos(2\pi f_c t) \)-এর জন্য:

\[ s(t) = A_c\left[1 + m\cos(2\pi f_m t)\right]\cos(2\pi f_c t), \qquad m = \frac{A_m}{A_c} \]

\( m \) is the modulation index (also called depth of modulation; \( m \times 100\% \) is percent modulation). If you see the AM wave on an oscilloscope, you can find \( m \) from the biggest and smallest envelope values:

\( m \) হলো modulation index (একে depth of modulation-ও বলে; \( m \times 100\% \) হলো percent modulation)। Oscilloscope-এ AM wave দেখলে envelope-এর সবচেয়ে বড় আর সবচেয়ে ছোট value থেকে \( m \) বের করা যায়:

\[ m = \frac{V_{max} - V_{min}}{V_{max} + V_{min}}, \qquad A_c = \frac{V_{max}+V_{min}}{2}, \qquad A_m = \frac{V_{max}-V_{min}}{2} \]
AM wave (m = 0.5)VmaxVminRed dashed line = envelope = shape of the messageAM spectrumfc − fmLSBfcCarrierfc + fmUSBBW = 2fm
Top: an AM wave with m = 0.5. The red dashed envelope has the shape of the message. Bottom: in the frequency domain, AM has a carrier and two sidebands.উপরে: m = 0.5 সহ একটা AM wave। লাল dashed envelope-এর shape message-এর মতো। নিচে: frequency domain-এ AM-এর একটা carrier আর দুইটা sideband থাকে।
Example: On an oscilloscope, \( V_{max} = 15 \) V and \( V_{min} = 5 \) V. Then \( m = (15-5)/(15+5) = 10/20 = 0.5 \) (50% modulation). Carrier amplitude \( A_c = (15+5)/2 = 10 \) V, message amplitude \( A_m = (15-5)/2 = 5 \) V. Check: \( A_m/A_c = 0.5 \). ✓
Example: Oscilloscope-এ \( V_{max} = 15 \) V আর \( V_{min} = 5 \) V। তাহলে \( m = (15-5)/(15+5) = 10/20 = 0.5 \) (50% modulation)। Carrier amplitude \( A_c = (15+5)/2 = 10 \) V, message amplitude \( A_m = (15-5)/2 = 5 \) V। যাচাই: \( A_m/A_c = 0.5 \)। ✓

Three cases of m, and over-modulationm-এর তিনটা case, এবং over-modulation

  • \( m < 1 \) (under-modulation): normal and safe. The envelope never touches zero.
  • \( m = 1 \) (100% modulation): the envelope just touches zero. Best power use, still no distortion.
  • \( m > 1 \) (over-modulation): the envelope crosses zero and gets "cut". The simple envelope detector gives a distorted message, and the signal spreads into extra frequencies (splatter), which disturbs nearby channels. Always avoid.
  • \( m < 1 \) (under-modulation): স্বাভাবিক এবং নিরাপদ। Envelope কখনো শূন্য ছোঁয় না।
  • \( m = 1 \) (100% modulation): envelope ঠিক শূন্য ছোঁয়। Power-এর সবচেয়ে ভালো ব্যবহার, তবুও কোনো distortion নেই।
  • \( m > 1 \) (over-modulation): envelope শূন্য পার হয়ে "কেটে" যায়। সাধারণ envelope detector তখন distorted message দেয়, আর signal বাড়তি frequency-তে ছড়িয়ে পড়ে (splatter), যা পাশের channel-কে বিরক্ত করে। সবসময় এড়িয়ে চলতে হবে।

Sidebands and bandwidthSideband এবং bandwidth

Open up the AM equation with the rule \( \cos A\cos B = \tfrac12[\cos(A-B)+\cos(A+B)] \):

\( \cos A\cos B = \tfrac12[\cos(A-B)+\cos(A+B)] \) সূত্র দিয়ে AM equation খুলে লিখলে:

\[ s(t) = \underbrace{A_c\cos 2\pi f_c t}_{\text{carrier}} + \underbrace{\frac{mA_c}{2}\cos 2\pi (f_c - f_m)t}_{\text{LSB}} + \underbrace{\frac{mA_c}{2}\cos 2\pi (f_c + f_m)t}_{\text{USB}} \]

So AM has 3 frequencies: the carrier \( f_c \), the lower sideband (LSB) at \( f_c - f_m \), and the upper sideband (USB) at \( f_c + f_m \). The bandwidth is from \( f_c - f_m \) to \( f_c + f_m \):

তাই AM-এ 3টা frequency থাকে: carrier \( f_c \), \( f_c - f_m \)-এ lower sideband (LSB), আর \( f_c + f_m \)-এ upper sideband (USB)। Bandwidth হলো \( f_c - f_m \) থেকে \( f_c + f_m \) পর্যন্ত:

\[ B_{AM} = 2 f_m \quad (\text{for a message band up to } f_{max}: \; B = 2 f_{max}) \]
Example: A 1 MHz carrier is amplitude modulated by a 5 kHz tone. Sidebands: \( 1000 - 5 = 995 \) kHz and \( 1000 + 5 = 1005 \) kHz. Bandwidth \( = 2 \times 5 = 10 \) kHz. This is why AM broadcast channels are about 10 kHz wide. The carrier frequency does not change the bandwidth.
Example: একটা 1 MHz carrier-কে 5 kHz tone দিয়ে amplitude modulate করা হলো। Sideband: \( 1000 - 5 = 995 \) kHz আর \( 1000 + 5 = 1005 \) kHz। Bandwidth \( = 2 \times 5 = 10 \) kHz। এই কারণেই AM broadcast channel প্রায় 10 kHz চওড়া। Carrier frequency bandwidth-কে বদলায় না।

Power in AM and efficiencyAM-এ power এবং efficiency

Power goes as amplitude squared. The carrier power is \( P_c = A_c^2/2R \). Each sideband has amplitude \( mA_c/2 \), so each sideband power is \( P_c m^2/4 \). Adding all three:

Power হয় amplitude-এর বর্গের সমানুপাতিক। Carrier power \( P_c = A_c^2/2R \)। প্রতিটা sideband-এর amplitude \( mA_c/2 \), তাই প্রতিটা sideband-এর power \( P_c m^2/4 \)। তিনটা যোগ করলে:

\[ P_t = P_c\left(1 + \frac{m^2}{2}\right), \qquad P_{SB,total} = P_c\frac{m^2}{2}, \qquad \eta = \frac{P_{SB}}{P_t} = \frac{m^2}{2 + m^2} \]
\[ I_t = I_c\sqrt{1 + \frac{m^2}{2}} \quad (\text{antenna current}), \qquad m_t = \sqrt{m_1^2 + m_2^2 + \cdots} \quad (\text{many tones}) \]
Example 1: \( P_c = 100 \) W, \( m = 0.5 \).
  • \( P_t = 100(1 + 0.25/2) = 100 \times 1.125 = 112.5 \) W.
  • Total sideband power = \( 100 \times 0.25/2 = 12.5 \) W, so each sideband = 6.25 W.
  • Efficiency \( \eta = 0.25/2.25 = 0.111 = 11.1\% \). Only 11% of the power carries the message!
Example 2: Same carrier, \( m = 1 \): \( P_t = 150 \) W, sidebands = 50 W, \( \eta = 1/3 = 33.3\% \). This is the maximum efficiency of standard AM.
Example 1: \( P_c = 100 \) W, \( m = 0.5 \)।
  • \( P_t = 100(1 + 0.25/2) = 100 \times 1.125 = 112.5 \) W।
  • মোট sideband power = \( 100 \times 0.25/2 = 12.5 \) W, তাই প্রতিটা sideband = 6.25 W।
  • Efficiency \( \eta = 0.25/2.25 = 0.111 = 11.1\% \)। মাত্র 11% power message বহন করে!
Example 2: একই carrier, \( m = 1 \): \( P_t = 150 \) W, sideband = 50 W, \( \eta = 1/3 = 33.3\% \)। এটাই standard AM-এর সর্বোচ্চ efficiency।
Example 3 (antenna current): The antenna current is 8 A with no modulation. After modulation it becomes 8.93 A. Find m.
\( (8.93/8)^2 = 1 + m^2/2 \Rightarrow 1.246 = 1 + m^2/2 \Rightarrow m^2 = 0.492 \Rightarrow m \approx 0.70 \).
Example 4 (two tones): A carrier is modulated by two tones with \( m_1 = 0.3 \) and \( m_2 = 0.4 \). Total \( m_t = \sqrt{0.09 + 0.16} = \sqrt{0.25} = 0.5 \).
Example 3 (antenna current): Modulation ছাড়া antenna current 8 A। Modulation-এর পর এটা হয় 8.93 A। m বের করুন।
\( (8.93/8)^2 = 1 + m^2/2 \Rightarrow 1.246 = 1 + m^2/2 \Rightarrow m^2 = 0.492 \Rightarrow m \approx 0.70 \)।
Example 4 (দুইটা tone): একটা carrier-কে দুইটা tone দিয়ে modulate করা হলো, \( m_1 = 0.3 \) আর \( m_2 = 0.4 \)। মোট \( m_t = \sqrt{0.09 + 0.16} = \sqrt{0.25} = 0.5 \)।

DSB-SC, SSB and VSB: saving power and bandwidthDSB-SC, SSB আর VSB: power আর bandwidth বাঁচানো

The carrier carries no information, but it takes at least 2/3 of the power. The two sidebands carry the same information. So engineers made cheaper versions:

  • DSB-SC (Double Sideband Suppressed Carrier): remove the carrier, keep both sidebands. \( s(t) = m(t)\cos 2\pi f_c t \). Bandwidth still \( 2f_m \). At \( m = 1 \) it saves \( 100/150 = 66.7\% \) power.
  • SSB (Single Sideband): remove the carrier and one sideband. Bandwidth only \( f_m \). At \( m = 1 \) it saves \( 125/150 = 83.3\% \) power. Used in HF and ham radio.
  • VSB (Vestigial Sideband): one full sideband plus a small part ("vestige") of the other. Bandwidth a little more than \( f_m \). Used for the video part of analog TV, where the message has very low frequencies and a perfect SSB filter is hard to make.

DSB-SC and SSB need a coherent (synchronous) detector: the receiver must make a local carrier with exactly the same frequency and phase. Standard AM does not need this.

Carrier কোনো information বহন করে না, কিন্তু অন্তত 2/3 power নিয়ে নেয়। আর দুইটা sideband একই information বহন করে। তাই engineer-রা কম খরচের version বানিয়েছেন:

  • DSB-SC (Double Sideband Suppressed Carrier): carrier বাদ, দুই sideband রাখা। \( s(t) = m(t)\cos 2\pi f_c t \)। Bandwidth এখনো \( 2f_m \)। \( m = 1 \)-এ এটা \( 100/150 = 66.7\% \) power বাঁচায়।
  • SSB (Single Sideband): carrier আর একটা sideband বাদ। Bandwidth মাত্র \( f_m \)। \( m = 1 \)-এ এটা \( 125/150 = 83.3\% \) power বাঁচায়। HF আর ham radio-তে ব্যবহার হয়।
  • VSB (Vestigial Sideband): একটা পুরো sideband আর অন্যটার ছোট একটা অংশ ("vestige")। Bandwidth \( f_m \)-এর চেয়ে একটু বেশি। Analog TV-র video অংশে ব্যবহার হতো, কারণ সেখানে message-এ খুব কম frequency থাকে আর নিখুঁত SSB filter বানানো কঠিন।

DSB-SC আর SSB-এর জন্য coherent (synchronous) detector লাগে: receiver-কে হুবহু একই frequency আর phase-এর local carrier বানাতে হয়। Standard AM-এ এটা লাগে না।

Typeধরন What is sentকী পাঠানো হয় Bandwidth Power saving (m = 1)Power সাশ্রয় (m = 1) DetectorDetector
DSB-FC (standard AM)Carrier + LSB + USB\( 2f_m \)0%Envelope (cheap)Envelope (সস্তা)
DSB-SCLSB + USB\( 2f_m \)66.7%Coherent
SSBOne sidebandএকটা sideband\( f_m \)83.3%Coherent
VSBOne sideband + vestigeএকটা sideband + vestigeslightly \( > f_m \)\( f_m \)-এর একটু বেশিclose to SSBSSB-এর কাছাকাছিCoherent

Envelope detector (how a cheap AM radio works)Envelope detector (সস্তা AM radio কীভাবে কাজ করে)

An envelope detector is just a diode + a capacitor C + a resistor R. The diode lets only the positive half through. The capacitor charges up to each peak and slowly leaks through R. So the output follows the peaks — the envelope — which is the message. For it to work, the RC time constant must be long compared to the carrier period, but short compared to the message period:

Envelope detector শুধু একটা diode + একটা capacitor C + একটা resistor R। Diode শুধু positive অর্ধেক যেতে দেয়। Capacitor প্রতিটা peak পর্যন্ত charge হয় আর R দিয়ে ধীরে ধীরে discharge হয়। তাই output peak গুলোকে — মানে envelope-কে — অনুসরণ করে, আর সেটাই message। এটা কাজ করতে হলে RC time constant carrier period-এর চেয়ে অনেক বড়, কিন্তু message period-এর চেয়ে অনেক ছোট হতে হবে:

\[ \frac{1}{f_c} \ll RC \ll \frac{1}{f_m} \]
Example: \( f_c = 1 \) MHz, \( f_m = 5 \) kHz. Then \( 1\,\mu s \ll RC \ll 200\,\mu s \). A value like \( RC = 20\,\mu s \) works (e.g., R = 10 kΩ, C = 2 nF). Envelope detection works only when \( m \le 1 \).
Example: \( f_c = 1 \) MHz, \( f_m = 5 \) kHz। তাহলে \( 1\,\mu s \ll RC \ll 200\,\mu s \)। \( RC = 20\,\mu s \)-এর মতো একটা value কাজ করবে (যেমন R = 10 kΩ, C = 2 nF)। Envelope detection শুধু \( m \le 1 \) হলেই কাজ করে।
Exam trap: AM bandwidth is \( 2f_m \), not \( f_m \) and not \( f_c \). If the question gives an audio band "up to 4.5 kHz", then B = 9 kHz. SSB is the one with bandwidth \( f_m \). Also remember: max AM efficiency = 33.3% at m = 1.
Exam-এর ফাঁদ: AM bandwidth হলো \( 2f_m \) — \( f_m \) নয়, \( f_c \)-ও নয়। প্রশ্নে যদি audio band "4.5 kHz পর্যন্ত" দেয়, তবে B = 9 kHz। Bandwidth \( f_m \) হয় SSB-তে। আরও মনে রাখুন: AM-এর সর্বোচ্চ efficiency = 33.3%, যখন m = 1।

3. Angle Modulation (FM and PM)3. Angle Modulation (FM এবং PM)

In angle modulation, the carrier amplitude stays constant. Instead, we change the angle of the carrier:

  • FM (Frequency Modulation): the carrier frequency goes up and down with the message.
  • PM (Phase Modulation): the carrier phase shifts with the message.

FM and PM are close cousins. FM of a message = PM of the integral of that message. For exams, focus mainly on FM.

Angle modulation-এ carrier-এর amplitude স্থির থাকে। তার বদলে carrier-এর angle বদলানো হয়:

  • FM (Frequency Modulation): message অনুযায়ী carrier-এর frequency বাড়ে-কমে।
  • PM (Phase Modulation): message অনুযায়ী carrier-এর phase সরে যায়।

FM আর PM খুব কাছের আত্মীয়। কোনো message-এর FM = ওই message-এর integral-এর PM। Exam-এর জন্য মূলত FM-এ জোর দিন।

Message m(t)FM wavemessage high → waves packed tight (higher f)message low → waves spread out (lower f)
FM: when the message is high, the carrier frequency is high (waves are close). When the message is low, the frequency is low (waves spread out). The amplitude never changes.FM: message বেশি হলে carrier-এর frequency বেশি (wave গুলো কাছাকাছি)। Message কম হলে frequency কম (wave গুলো ছড়ানো)। Amplitude কখনো বদলায় না।

Frequency deviation and modulation index βFrequency deviation এবং modulation index β

In FM, the instantaneous frequency is \( f_i(t) = f_c + k_f\, m(t) \). Here \( k_f \) is the frequency sensitivity (Hz per volt). The biggest shift from \( f_c \) is the peak frequency deviation \( \Delta f = k_f A_m \). It depends only on the message amplitude, not on its frequency.

The FM modulation index \( \beta \) compares the deviation with the message frequency:

FM-এ instantaneous frequency হলো \( f_i(t) = f_c + k_f\, m(t) \)। এখানে \( k_f \) হলো frequency sensitivity (Hz per volt)। \( f_c \) থেকে সবচেয়ে বড় সরে যাওয়াকে বলে peak frequency deviation \( \Delta f = k_f A_m \)। এটা শুধু message-এর amplitude-এর উপর নির্ভর করে, frequency-র উপর না।

FM modulation index \( \beta \) deviation-কে message frequency-র সাথে তুলনা করে:

\[ \beta = \frac{\Delta f}{f_m}, \qquad s_{FM}(t) = A_c\cos\left(2\pi f_c t + \beta\sin 2\pi f_m t\right) \]
\[ \text{PM: } s_{PM}(t) = A_c\cos\left(2\pi f_c t + k_p\, m(t)\right), \qquad \beta_{PM} = \Delta\phi = k_p A_m \]
Example: \( k_f = 5 \) kHz/V, message \( A_m = 3 \) V at \( f_m = 1 \) kHz. Then \( \Delta f = 5 \times 3 = 15 \) kHz and \( \beta = 15/1 = 15 \). If the carrier is 100 MHz, the frequency swings between 99.985 MHz and 100.015 MHz.
Example: \( k_f = 5 \) kHz/V, message \( A_m = 3 \) V, \( f_m = 1 \) kHz। তাহলে \( \Delta f = 5 \times 3 = 15 \) kHz আর \( \beta = 15/1 = 15 \)। Carrier 100 MHz হলে frequency 99.985 MHz থেকে 100.015 MHz-এর মধ্যে দোলে।

Bandwidth: Carson's ruleBandwidth: Carson's rule

In theory an FM signal has infinite sidebands at \( f_c \pm f_m, f_c \pm 2f_m, \dots \) (their sizes come from Bessel functions). But the far sidebands are tiny. Carson's rule gives the bandwidth that holds about 98% of the power:

Theory অনুযায়ী FM signal-এ অসীম সংখ্যক sideband থাকে, \( f_c \pm f_m, f_c \pm 2f_m, \dots \)-এ (তাদের size আসে Bessel function থেকে)। কিন্তু দূরের sideband গুলো খুব ছোট। Carson's rule এমন bandwidth দেয় যার মধ্যে প্রায় 98% power থাকে:

\[ B_{FM} \approx 2(\Delta f + f_m) = 2 f_m(\beta + 1) \]
Example 1 (FM radio): Commercial FM uses \( \Delta f = 75 \) kHz and audio up to \( f_m = 15 \) kHz. \( \beta = 75/15 = 5 \). \( B = 2(75 + 15) = 180 \) kHz. That is why FM stations are spaced 200 kHz apart (180 kHz + guard space).
Example 2 (what changes what): \( \Delta f = 10 \) kHz, \( f_m = 2 \) kHz → \( \beta = 5 \), \( B = 2(10+2) = 24 \) kHz.
  • Double the message amplitude: \( \Delta f = 20 \) kHz, \( \beta = 10 \), \( B = 2(20+2) = 44 \) kHz.
  • Double the message frequency (same amplitude): \( \Delta f \) stays 10 kHz, \( \beta = 10/4 = 2.5 \), \( B = 2(10+4) = 28 \) kHz.
Example 1 (FM radio): Commercial FM-এ \( \Delta f = 75 \) kHz আর audio \( f_m = 15 \) kHz পর্যন্ত। \( \beta = 75/15 = 5 \)। \( B = 2(75 + 15) = 180 \) kHz। এই কারণেই FM station গুলো 200 kHz দূরে দূরে থাকে (180 kHz + guard space)।
Example 2 (কী বদলালে কী বদলায়): \( \Delta f = 10 \) kHz, \( f_m = 2 \) kHz → \( \beta = 5 \), \( B = 2(10+2) = 24 \) kHz।
  • Message-এর amplitude দ্বিগুণ: \( \Delta f = 20 \) kHz, \( \beta = 10 \), \( B = 2(20+2) = 44 \) kHz।
  • Message-এর frequency দ্বিগুণ (amplitude একই): \( \Delta f \) থাকে 10 kHz, \( \beta = 10/4 = 2.5 \), \( B = 2(10+4) = 28 \) kHz।

Narrowband vs wideband FMNarrowband বনাম wideband FM

  • Narrowband FM (NBFM): \( \beta \) is small (much less than 1, commonly \( \beta < 0.3 \)). Only one pair of sidebands matters, so \( B \approx 2f_m \) — same as AM. Used in walkie-talkies and police radio.
  • Wideband FM (WBFM): \( \beta \) is large (more than 1). Many sidebands, \( B \approx 2(\Delta f + f_m) \), and when \( \beta \) is very large, \( B \approx 2\Delta f \). Used in FM broadcast. It gives very good sound quality and noise immunity.
  • Narrowband FM (NBFM): \( \beta \) ছোট (1-এর চেয়ে অনেক কম, সাধারণত \( \beta < 0.3 \))। শুধু এক জোড়া sideband গুরুত্বপূর্ণ, তাই \( B \approx 2f_m \) — AM-এর মতোই। Walkie-talkie আর police radio-তে ব্যবহার হয়।
  • Wideband FM (WBFM): \( \beta \) বড় (1-এর বেশি)। অনেক sideband, \( B \approx 2(\Delta f + f_m) \), আর \( \beta \) খুব বড় হলে \( B \approx 2\Delta f \)। FM broadcast-এ ব্যবহার হয়। খুব ভালো sound quality আর noise immunity দেয়।
Example: \( \Delta f = 1 \) kHz, \( f_m = 5 \) kHz → \( \beta = 0.2 \) (narrowband). Carson: \( 2(1+5) = 12 \) kHz; the NBFM approximation gives \( 2 \times 5 = 10 \) kHz. Both say "about the same as AM".
Power in FM: amplitude is fixed, so total power \( P = A_c^2/2R \) is always the same. For \( A_c = 10 \) V and \( R = 50\,\Omega \): \( P = 100/100 = 1 \) W — no matter what β is. Modulation only moves power from the carrier into the sidebands.
Example: \( \Delta f = 1 \) kHz, \( f_m = 5 \) kHz → \( \beta = 0.2 \) (narrowband)। Carson: \( 2(1+5) = 12 \) kHz; NBFM approximation দেয় \( 2 \times 5 = 10 \) kHz। দুইটাই বলে "প্রায় AM-এর সমান"।
FM-এ power: amplitude স্থির, তাই মোট power \( P = A_c^2/2R \) সবসময় একই। \( A_c = 10 \) V আর \( R = 50\,\Omega \) হলে: \( P = 100/100 = 1 \) W — β যা-ই হোক। Modulation শুধু carrier থেকে power সরিয়ে sideband-এ দেয়।

AM vs FMAM বনাম FM

Pointবিষয় AM FM
What changesকী বদলায় AmplitudeAmplitude Frequency (amplitude fixed)Frequency (amplitude স্থির)
Bandwidth \( 2f_m \) (small, e.g. 10 kHz)(কম, যেমন 10 kHz) \( 2(\Delta f + f_m) \) (large, e.g. 180 kHz)(বেশি, যেমন 180 kHz)
Noise immunityNoise immunity Poor — noise changes amplitude, which is the messageদুর্বল — noise amplitude বদলায়, আর amplitude-ই message Good — a limiter cuts amplitude noise; message is in frequencyভালো — limiter amplitude-এর noise কেটে দেয়; message থাকে frequency-তে
Transmitted powerপাঠানো power Changes with m; carrier wastes ≥ 2/3m-এর সাথে বদলায়; carrier অন্তত 2/3 নষ্ট করে Constant; all power usefulস্থির; সব power কাজে লাগে
Range / coverageRange / coverage Long (MW/SW bounce off ionosphere)অনেক দূর (MW/SW ionosphere থেকে প্রতিফলিত হয়) Short, line-of-sight (VHF)কম, line-of-sight (VHF)
CircuitCircuit Simple, cheapসহজ, সস্তা More complexবেশি জটিল
Extraঅতিরিক্ত — Capture effect: the stronger station wins, weaker one is suppressedCapture effect: শক্তিশালী station জিতে যায়, দুর্বলটা চাপা পড়ে
Exam trap: In FM, \( \Delta f \) depends on the message amplitude only, while \( \beta = \Delta f/f_m \) depends on both amplitude and frequency. In PM, \( \beta = k_p A_m \) does not depend on \( f_m \). FM trades more bandwidth for better noise performance. Carson's rule uses \( \Delta f + f_m \), not \( \beta + f_m \).
Exam-এর ফাঁদ: FM-এ \( \Delta f \) শুধু message-এর amplitude-এর উপর নির্ভর করে, কিন্তু \( \beta = \Delta f/f_m \) নির্ভর করে amplitude আর frequency দুটোর উপর। PM-এ \( \beta = k_p A_m \), \( f_m \)-এর উপর নির্ভর করে না। FM বেশি bandwidth খরচ করে ভালো noise performance কেনে। Carson's rule-এ \( \Delta f + f_m \) ব্যবহার হয়, \( \beta + f_m \) নয়।

4. Sampling and Pulse Modulation (PCM)4. Sampling এবং Pulse Modulation (PCM)

To send voice or music over a digital network, we must turn the analog wave into bits. The first step is sampling: we measure (take a "sample" of) the signal value at regular time gaps \( T_s \). The sampling rate is \( f_s = 1/T_s \) samples per second.

Voice বা music digital network দিয়ে পাঠাতে হলে analog wave-কে bit-এ বদলাতে হয়। প্রথম ধাপ হলো sampling: নির্দিষ্ট সময় পরপর \( T_s \) signal-এর value মাপা (একটা "sample" নেওয়া)। Sampling rate হলো \( f_s = 1/T_s \) sample per second।

Nyquist sampling theoremNyquist sampling theorem

A band-limited signal with highest frequency \( f_{max} \) can be rebuilt perfectly from its samples if we sample at least twice as fast as \( f_{max} \):

যে band-limited signal-এর সবচেয়ে বেশি frequency \( f_{max} \), তাকে sample থেকে নিখুঁতভাবে আবার তৈরি করা যায়, যদি \( f_{max} \)-এর অন্তত দ্বিগুণ হারে sample নেওয়া হয়:

\[ f_s \ge 2 f_{max}, \qquad \text{Nyquist rate} = 2f_{max}, \qquad \text{Nyquist interval} = \frac{1}{2f_{max}} \]
Examples:
  • Telephone voice is limited to about 4 kHz → Nyquist rate = 8 kHz. That is why phones sample at 8000 samples/s (interval 125 µs).
  • Human hearing goes to about 20 kHz → need ≥ 40 kHz. Music CDs use 44.1 kHz (a little extra for filter room).
  • \( x(t) = 3\cos(200\pi t) + 5\sin(600\pi t) \). Frequencies: \( 200\pi/2\pi = 100 \) Hz and \( 600\pi/2\pi = 300 \) Hz. \( f_{max} = 300 \) Hz, so Nyquist rate = 600 Hz.
  • Product signals: \( \cos(2\pi \cdot 1000 t)\cos(2\pi \cdot 3000 t) \) contains 2000 Hz and 4000 Hz (sum and difference), so Nyquist rate = 8000 Hz.
Example:
  • Telephone voice প্রায় 4 kHz-এ সীমিত → Nyquist rate = 8 kHz। এই কারণেই phone প্রতি second-এ 8000 sample নেয় (interval 125 µs)।
  • মানুষ প্রায় 20 kHz পর্যন্ত শুনতে পায় → অন্তত 40 kHz লাগবে। Music CD ব্যবহার করে 44.1 kHz (filter-এর জন্য একটু বাড়তি জায়গা)।
  • \( x(t) = 3\cos(200\pi t) + 5\sin(600\pi t) \)। Frequency: \( 200\pi/2\pi = 100 \) Hz আর \( 600\pi/2\pi = 300 \) Hz। \( f_{max} = 300 \) Hz, তাই Nyquist rate = 600 Hz।
  • গুণফল signal: \( \cos(2\pi \cdot 1000 t)\cos(2\pi \cdot 3000 t) \)-এ 2000 Hz আর 4000 Hz থাকে (যোগফল আর বিয়োগফল), তাই Nyquist rate = 8000 Hz।

AliasingAliasing

If we sample too slowly (\( f_s < 2f_{max} \)), a high frequency "pretends" to be a low frequency. This fake frequency is called an alias. Once it happens, we cannot undo it. You have seen this in movies: a fast car wheel looks like it turns slowly backwards. The alias frequency is the distance from \( f \) to the nearest multiple of \( f_s \):

খুব ধীরে sample নিলে (\( f_s < 2f_{max} \)), একটা বেশি frequency নিজেকে কম frequency হিসেবে "ভান" করে। এই নকল frequency-কে বলে alias। একবার হয়ে গেলে আর ঠিক করা যায় না। Movie-তে দেখেছেন: দ্রুত ঘোরা গাড়ির চাকা মনে হয় ধীরে উল্টো দিকে ঘুরছে। Alias frequency হলো \( f \) থেকে \( f_s \)-এর সবচেয়ে কাছের গুণিতকের দূরত্ব:

\[ f_{alias} = \left| f - k f_s \right| \quad (\text{choose integer } k \text{ so that } 0 \le f_{alias} \le f_s/2) \]
Example: A 7 kHz tone is sampled at 10 kHz. Nyquist needs 14 kHz, so aliasing happens. \( f_{alias} = |7 - 10| = 3 \) kHz. After reconstruction, you hear a 3 kHz tone that was never there!
Another: 9 kHz sampled at 12 kHz → \( |9 - 12| = 3 \) kHz. And 25 kHz sampled at 8 kHz → \( |25 - 3\times8| = 1 \) kHz.
Fix: put an anti-aliasing low-pass filter before the sampler to cut everything above \( f_s/2 \).
Example: একটা 7 kHz tone-কে 10 kHz-এ sample করা হলো। Nyquist অনুযায়ী 14 kHz লাগতো, তাই aliasing হবে। \( f_{alias} = |7 - 10| = 3 \) kHz। Reconstruction-এর পর আপনি একটা 3 kHz tone শুনবেন, যেটা আসলে কখনো ছিলই না!
আরেকটা: 9 kHz-কে 12 kHz-এ sample → \( |9 - 12| = 3 \) kHz। আর 25 kHz-কে 8 kHz-এ sample → \( |25 - 3\times8| = 1 \) kHz।
সমাধান: sampler-এর আগে একটা anti-aliasing low-pass filter বসান, যাতে \( f_s/2 \)-এর উপরের সব কেটে যায়।

Pulse modulation: PAM, PWM, PPMPulse modulation: PAM, PWM, PPM

After sampling, each sample can control a pulse. There are three analog ways to do this (the pulse still carries an analog value):

Sampling-এর পর প্রতিটা sample একটা pulse-কে নিয়ন্ত্রণ করতে পারে। এর তিনটা analog উপায় আছে (pulse তখনো একটা analog value বহন করে):

Typeধরন What the sample changesSample কী বদলায় Noteমন্তব্য
PAM (Pulse Amplitude Modulation)Pulse heightPulse-এর উচ্চতাSimplest; first step of PCM; noisy like AMসবচেয়ে সহজ; PCM-এর প্রথম ধাপ; AM-এর মতো noise-এ দুর্বল
PWM / PDM (Pulse Width/Duration)Pulse widthPulse-এর চওড়াUsed in motor speed control, class-D amplifiersMotor speed control, class-D amplifier-এ ব্যবহার
PPM (Pulse Position Modulation)Pulse position (time shift)Pulse-এর অবস্থান (time shift)Constant height and width → good noise immunity, low powerউচ্চতা আর চওড়া স্থির → ভালো noise immunity, কম power

PCM: sample → quantize → encodePCM: sample → quantize → encode

PCM (Pulse Code Modulation) is fully digital. It has three steps:

  1. Sample at \( f_s \ge 2f_{max} \) (after an anti-aliasing filter).
  2. Quantize: round each sample to the nearest of \( L \) fixed levels.
  3. Encode: write the level number as an \( n \)-bit binary code.

At the receiver: regenerate the bits, decode to levels, then pass through a low-pass (reconstruction) filter.

PCM (Pulse Code Modulation) পুরোপুরি digital। এর তিনটা ধাপ:

  1. Sample: \( f_s \ge 2f_{max} \) হারে (anti-aliasing filter-এর পরে)।
  2. Quantize: প্রতিটা sample-কে \( L \)টা নির্দিষ্ট level-এর সবচেয়ে কাছেরটায় round করা।
  3. Encode: level-এর নম্বরটা \( n \)-bit binary code হিসেবে লেখা।

Receiver-এ: bit গুলো regenerate করা, decode করে level-এ ফেরা, তারপর একটা low-pass (reconstruction) filter দিয়ে পাঠানো।

Analog inAnti-alias LPFSamplerQuantizerEncoder101100…fs ≥ 2fmaxL = 2ⁿ levelsn bits/sample3-bit quantization (L = 8 levels)000001010011100101110111samplequantized
PCM transmitter blocks (top) and 3-bit quantization (bottom): each blue sample is moved to the center of its level (red) and given a 3-bit code.PCM transmitter-এর block গুলো (উপরে) আর 3-bit quantization (নিচে): প্রতিটা নীল sample-কে তার level-এর মাঝখানে (লাল) সরানো হয় এবং একটা 3-bit code দেওয়া হয়।
\[ L = 2^n, \qquad \Delta = \frac{V_{max} - V_{min}}{L}, \qquad |e_q|_{max} = \frac{\Delta}{2}, \qquad N_q = \frac{\Delta^2}{12} \]

\( \Delta \) is the step size. The difference between the real sample and the rounded level is the quantization error. It acts like noise, called quantization noise, with average power \( \Delta^2/12 \). More bits → smaller \( \Delta \) → less noise.

\( \Delta \) হলো step size। আসল sample আর round করা level-এর পার্থক্যকে বলে quantization error। এটা noise-এর মতো আচরণ করে, একে বলে quantization noise, যার গড় power \( \Delta^2/12 \)। বেশি bit → ছোট \( \Delta \) → কম noise।

Example 1: A signal goes from −5 V to +5 V, and we use \( n = 8 \) bits. \( L = 2^8 = 256 \) levels. \( \Delta = 10/256 = 0.039 \) V ≈ 39 mV. Max quantization error \( = \Delta/2 \approx 19.5 \) mV.
Example 2 (3-bit coding): Range 0–8 V, \( n = 3 \) → \( L = 8 \), \( \Delta = 1 \) V. Level k covers k V to (k+1) V. A sample of 5.3 V falls in level 5 → code 101. A sample of 2.8 V → level 2 → code 010.
Example 1: একটা signal −5 V থেকে +5 V পর্যন্ত যায়, আর আমরা \( n = 8 \) bit ব্যবহার করি। \( L = 2^8 = 256 \) level। \( \Delta = 10/256 = 0.039 \) V ≈ 39 mV। সর্বোচ্চ quantization error \( = \Delta/2 \approx 19.5 \) mV।
Example 2 (3-bit coding): Range 0–8 V, \( n = 3 \) → \( L = 8 \), \( \Delta = 1 \) V। Level k মানে k V থেকে (k+1) V। 5.3 V-এর একটা sample পড়ে level 5-এ → code 101। 2.8 V-এর sample → level 2 → code 010।

SQNR: signal-to-quantization-noise ratioSQNR: signal-to-quantization-noise ratio

For a full-range sine wave, the SQNR of an n-bit uniform quantizer is:

একটা full-range sine wave-এর জন্য n-bit uniform quantizer-এর SQNR হলো:

\[ \text{SQNR (dB)} \approx 6.02\,n + 1.76 \]
Example: \( n = 8 \): SQNR ≈ \( 6.02 \times 8 + 1.76 = 49.9 \) dB. \( n = 16 \) (CD): ≈ 98.1 dB.
Rule of thumb: each extra bit adds about 6 dB.
Design question: we need SQNR ≥ 40 dB. \( 6.02n + 1.76 \ge 40 \Rightarrow n \ge 38.24/6.02 = 6.35 \). Bits must be a whole number, so \( n = 7 \) (gives 43.9 dB).
Example: \( n = 8 \): SQNR ≈ \( 6.02 \times 8 + 1.76 = 49.9 \) dB। \( n = 16 \) (CD): ≈ 98.1 dB।
সহজ নিয়ম: প্রতিটা বাড়তি bit প্রায় 6 dB যোগ করে।
Design প্রশ্ন: SQNR ≥ 40 dB দরকার। \( 6.02n + 1.76 \ge 40 \Rightarrow n \ge 38.24/6.02 = 6.35 \)। Bit পূর্ণসংখ্যা হতে হবে, তাই \( n = 7 \) (43.9 dB দেয়)।

PCM bit ratePCM bit rate

\[ R_b = n \cdot f_s \quad \text{(bits/s)}, \qquad B_{min} \approx \frac{R_b}{2} \]
Example (digital telephone): voice up to 4 kHz → \( f_s = 8000 \) samples/s. Each sample uses 8 bits. \( R_b = 8000 \times 8 = 64{,}000 \) bps = 64 kbps. This is the famous DS0 channel — the building block of T1 and E1.
Example (music CD): \( 44{,}100 \times 16 \text{ bits} \times 2 \text{ channels (stereo)} = 1{,}411{,}200 \) bps ≈ 1.41 Mbps.
Example (digital telephone): voice 4 kHz পর্যন্ত → \( f_s = 8000 \) sample/s। প্রতিটা sample-এ 8 bit। \( R_b = 8000 \times 8 = 64{,}000 \) bps = 64 kbps। এটাই বিখ্যাত DS0 channel — T1 আর E1-এর মূল ইট।
Example (music CD): \( 44{,}100 \times 16 \text{ bit} \times 2 \text{ channel (stereo)} = 1{,}411{,}200 \) bps ≈ 1.41 Mbps।

Non-uniform quantization (companding): quiet sounds are more common than loud ones. So phones use small steps for small values and big steps for big values. This is done by compressing before a uniform quantizer and expanding after (com-pand-ing). Two standards: μ-law (North America, Japan, μ = 255) and A-law (Europe and most of the world, A = 87.6).

Non-uniform quantization (companding): জোরে শব্দের চেয়ে আস্তে শব্দ বেশি থাকে। তাই phone ছোট value-র জন্য ছোট step আর বড় value-র জন্য বড় step ব্যবহার করে। এটা করা হয় uniform quantizer-এর আগে compress করে আর পরে expand করে (com-pand-ing)। দুইটা standard: μ-law (North America, Japan, μ = 255) আর A-law (Europe এবং পৃথিবীর বেশিরভাগ জায়গা, A = 87.6)।

Delta modulation (DM) and slope overloadDelta modulation (DM) এবং slope overload

Delta modulation sends only 1 bit per sample. The receiver keeps a staircase guess of the signal. Each sample, the transmitter says "go up one step Δ" (bit 1) or "go down one step Δ" (bit 0). Very simple. We must sample much faster than Nyquist. Bit rate = \( f_s \).

Two problems:

  • Slope overload: the signal rises faster than the staircase can climb. The staircase falls behind. It happens when the signal slope is bigger than \( \Delta \cdot f_s \).
  • Granular noise: when the signal is flat, the staircase keeps going up-down-up-down around it. This happens when Δ is too big.

So small Δ → slope overload; big Δ → granular noise. Adaptive DM changes Δ on the fly to fix both.

Delta modulation প্রতি sample-এ মাত্র 1 bit পাঠায়। Receiver signal-এর একটা সিঁড়ির মতো (staircase) অনুমান রাখে। প্রতিটা sample-এ transmitter বলে "এক step Δ উপরে যাও" (bit 1) অথবা "এক step Δ নিচে যাও" (bit 0)। খুব সহজ। Nyquist-এর চেয়ে অনেক দ্রুত sample নিতে হয়। Bit rate = \( f_s \)।

দুইটা সমস্যা:

  • Slope overload: signal এত দ্রুত বাড়ে যে staircase ধরতে পারে না, পিছিয়ে পড়ে। এটা হয় যখন signal-এর slope \( \Delta \cdot f_s \)-এর চেয়ে বেশি।
  • Granular noise: signal যখন সমান থাকে, staircase তার চারপাশে উপর-নিচ-উপর-নিচ করতে থাকে। Δ খুব বড় হলে এটা হয়।

তাই ছোট Δ → slope overload; বড় Δ → granular noise। Adaptive DM চলতে চলতে Δ বদলিয়ে দুটোই ঠিক করে।

\[ \text{No slope overload if: } \left|\frac{dx}{dt}\right|_{max} \le \Delta \cdot f_s; \quad \text{for } x = A\sin 2\pi f t: \; 2\pi f A \le \Delta f_s \]
Example: DM with \( \Delta = 0.1 \) V and \( f_s = 64 \) kHz. Max slope it can follow = \( 0.1 \times 64000 = 6400 \) V/s. For a 1 kHz sine, \( A_{max} = 6400/(2\pi \times 1000) = 1.02 \) V. A bigger amplitude causes slope overload. Bit rate = 64 kbps (1 bit per sample).
Example: DM-এ \( \Delta = 0.1 \) V আর \( f_s = 64 \) kHz। সর্বোচ্চ যে slope অনুসরণ করতে পারে = \( 0.1 \times 64000 = 6400 \) V/s। 1 kHz sine-এর জন্য \( A_{max} = 6400/(2\pi \times 1000) = 1.02 \) V। এর বেশি amplitude হলে slope overload হবে। Bit rate = 64 kbps (প্রতি sample-এ 1 bit)।

DPCM ideaDPCM-এর ধারণা

Neighbouring samples of voice are very close to each other. So instead of sending each full sample, DPCM (Differential PCM) sends only the difference between the real sample and a predicted value (for example, the previous sample). Differences are small, so they need fewer bits.

Voice-এর পাশাপাশি sample গুলো একে অপরের খুব কাছাকাছি। তাই প্রতিটা পুরো sample পাঠানোর বদলে DPCM (Differential PCM) শুধু আসল sample আর predicted value (যেমন আগের sample)-এর পার্থক্য পাঠায়। পার্থক্য ছোট, তাই কম bit লাগে।

Example: Samples: 100, 102, 105, 104, 101. PCM with range 0–255 needs 8 bits each. DPCM sends 100 once, then differences +2, +3, −1, −3. If differences always stay within −8 to +7, 4 bits are enough — half the bit rate. ADPCM (adaptive DPCM) is used for 32 kbps voice, half of 64 kbps PCM.
Example: Sample: 100, 102, 105, 104, 101। 0–255 range-এ PCM-এর প্রতিটায় 8 bit লাগে। DPCM একবার 100 পাঠায়, তারপর পার্থক্য +2, +3, −1, −3। পার্থক্য যদি সবসময় −8 থেকে +7-এর মধ্যে থাকে, 4 bit-ই যথেষ্ট — bit rate অর্ধেক। ADPCM (adaptive DPCM) 32 kbps voice-এ ব্যবহার হয়, যা 64 kbps PCM-এর অর্ধেক।
Exam traps: (1) If a signal is written with ω (like \( \cos 600\pi t \)), convert to f first: f = 300 Hz. (2) Nyquist rate = \( 2f_{max} \); Nyquist interval = \( 1/(2f_{max}) \). (3) PCM bit rate = n × fs, not n × fmax. (4) L = 2ⁿ: 256 levels need 8 bits, but 200 levels also need 8 bits (round up). (5) DM: 1 bit/sample, so bit rate = fs.
Exam-এর ফাঁদ: (1) Signal যদি ω দিয়ে লেখা থাকে (যেমন \( \cos 600\pi t \)), আগে f-এ বদলান: f = 300 Hz। (2) Nyquist rate = \( 2f_{max} \); Nyquist interval = \( 1/(2f_{max}) \)। (3) PCM bit rate = n × fs, n × fmax নয়। (4) L = 2ⁿ: 256 level-এর জন্য 8 bit লাগে, কিন্তু 200 level-এর জন্যও 8 bit লাগে (উপরের দিকে round করুন)। (5) DM: প্রতি sample-এ 1 bit, তাই bit rate = fs।

5. Line Coding5. Line Coding

Line coding turns a string of bits into a digital (baseband) signal that can go on a wire. Different codes use different voltage rules. A good line code should have:

  • No DC component: the average voltage should be near zero. Many links (transformers, capacitors) cannot pass DC. A DC part also wastes power.
  • Self-clocking (synchronization): the signal should change often, so the receiver can keep its clock in step with the sender. Long runs without any change make the receiver lose count.
  • Small bandwidth: fewer signal changes per second need less bandwidth.
  • Some error detection (a bonus in some codes, like AMI).

Two rates to remember: data rate N (bits per second) and signal rate S (signal elements per second = baud).

Line coding একটা bit-এর ধারাকে এমন digital (baseband) signal-এ বদলায় যেটা তার দিয়ে যেতে পারে। আলাদা code আলাদা voltage নিয়ম ব্যবহার করে। একটা ভালো line code-এ থাকা উচিত:

  • DC component না থাকা: গড় voltage শূন্যের কাছাকাছি হওয়া উচিত। অনেক link (transformer, capacitor) DC pass করতে পারে না। DC অংশ power-ও নষ্ট করে।
  • Self-clocking (synchronization): signal ঘন ঘন বদলানো উচিত, যাতে receiver তার clock sender-এর সাথে মিলিয়ে রাখতে পারে। অনেকক্ষণ কোনো পরিবর্তন না হলে receiver গোনায় ভুল করে।
  • কম bandwidth: প্রতি second-এ কম পরিবর্তন মানে কম bandwidth লাগে।
  • কিছু error detection (কিছু code-এ বাড়তি সুবিধা, যেমন AMI)।

দুইটা rate মনে রাখুন: data rate N (bit per second) আর signal rate S (প্রতি second-এ signal element = baud)।

The main line codes (rules)প্রধান line code গুলো (নিয়ম)

  • NRZ-L (Non-Return-to-Zero Level): the level shows the bit. In this book: 1 = high (+V), 0 = low (−V). (Forouzan uses the opposite; both are fine if you say which one.)
  • NRZ-I (NRZ Invert): a 1 = change (invert) the level at the start of the bit; a 0 = no change. The information is in the change, not the level.
  • RZ (Return-to-Zero, bipolar): 1 = +V for the first half, then back to 0; 0 = −V for the first half, then back to 0. Every bit has a change, but it uses 3 levels and double bandwidth.
  • Manchester (IEEE 802.3 Ethernet): a change in the middle of every bit. 0 = high → low, 1 = low → high. (Some books use the opposite, called the G. E. Thomas convention.)
  • Differential Manchester: always a change in the middle (for the clock). A 0 = an extra change at the start of the bit; a 1 = no change at the start. Used in Token Ring. It works even if the two wires are swapped.
  • AMI (Alternate Mark Inversion, bipolar): 0 = 0 V; each 1 = +V or −V, alternating. (Pseudoternary is the opposite: 1 = 0 V, 0s alternate.)
  • NRZ-L (Non-Return-to-Zero Level): level-ই bit দেখায়। এই বইয়ে: 1 = high (+V), 0 = low (−V)। (Forouzan উল্টোটা ব্যবহার করেন; কোনটা ধরছেন বলে দিলে দুটোই ঠিক।)
  • NRZ-I (NRZ Invert): 1 = bit-এর শুরুতে level বদলাও (invert); 0 = কোনো পরিবর্তন নেই। Information থাকে পরিবর্তনে, level-এ না।
  • RZ (Return-to-Zero, bipolar): 1 = প্রথম অর্ধেকে +V, তারপর 0-তে ফেরা; 0 = প্রথম অর্ধেকে −V, তারপর 0-তে ফেরা। প্রতিটা bit-এ পরিবর্তন আছে, কিন্তু 3টা level আর দ্বিগুণ bandwidth লাগে।
  • Manchester (IEEE 802.3 Ethernet): প্রতিটা bit-এর মাঝখানে একটা পরিবর্তন। 0 = high → low, 1 = low → high। (কিছু বই উল্টোটা ব্যবহার করে, একে G. E. Thomas convention বলে।)
  • Differential Manchester: মাঝখানে সবসময় একটা পরিবর্তন (clock-এর জন্য)। 0 = bit-এর শুরুতে বাড়তি একটা পরিবর্তন; 1 = শুরুতে কোনো পরিবর্তন নেই। Token Ring-এ ব্যবহার হয়। দুইটা তার উল্টে গেলেও কাজ করে।
  • AMI (Alternate Mark Inversion, bipolar): 0 = 0 V; প্রতিটা 1 = +V অথবা −V, পালা করে। (Pseudoternary এর উল্টো: 1 = 0 V, 0 গুলো পালা করে।)
1011001NRZ-LNRZ-IRZ (bipolar)ManchesterDiff. ManchesterAMI (bipolar)
Line coding waveforms for the bit pattern 1011001. NRZ-I starts from a low level. Differential Manchester assumes the line was high before the first bit. AMI sends the first 1 as +V.Bit pattern 1011001-এর line coding waveform। NRZ-I শুরু হয়েছে low level থেকে। Differential Manchester ধরে নিয়েছে প্রথম bit-এর আগে line high ছিল। AMI প্রথম 1-কে +V হিসেবে পাঠিয়েছে।
Reading the figure (bits 1 0 1 1 0 0 1):
  • NRZ-L: + − + + − − +
  • NRZ-I (start low): each 1 flips the level → + + − + + + −. There are four 1s, so there are exactly 4 transitions.
  • Manchester: 1 = low→high, 0 = high→low. Every bit has a middle change → always self-clocking.
  • AMI: + 0 − + 0 0 −. The 1s alternate, so the average is zero (no DC). If two 1s in a row had the same sign, the receiver knows there is an error (bipolar violation).
Figure পড়া (bit 1 0 1 1 0 0 1):
  • NRZ-L: + − + + − − +
  • NRZ-I (low থেকে শুরু): প্রতিটা 1 level উল্টায় → + + − + + + −। চারটা 1 আছে, তাই ঠিক 4টা transition।
  • Manchester: 1 = low→high, 0 = high→low। প্রতিটা bit-এর মাঝখানে পরিবর্তন → সবসময় self-clocking।
  • AMI: + 0 − + 0 0 −। 1 গুলো পালা করে, তাই গড় শূন্য (DC নেই)। পরপর দুইটা 1 একই sign পেলে receiver বুঝবে error হয়েছে (bipolar violation)।

Comparison tableতুলনামূলক table

CodeCode LevelsLevel DC componentDC component Self-clockingSelf-clocking Bandwidth (avg.)Bandwidth (গড়) Used inকোথায়
NRZ-L2YesআছেNo (long 0s or 1s)না (লম্বা 0 বা 1)≈ N/2RS-232
NRZ-I2YesআছেNo for long 0s (1s are OK)লম্বা 0-তে না (1 ঠিক আছে)≈ N/2FDDI, 100BASE-FX (with 4B/5B)
RZ (bipolar)3Depends on dataData-র উপর নির্ভর করেYesহ্যাঁ≈ NRarely used nowএখন খুব কম
Manchester2NoনেইYesহ্যাঁ≈ N (double NRZ)≈ N (NRZ-এর দ্বিগুণ)10 Mbps Ethernet
Diff. Manchester2NoনেইYesহ্যাঁ≈ NToken Ring
AMI (bipolar)3NoনেইNo for long 0s (fix: B8ZS, HDB3)লম্বা 0-তে না (সমাধান: B8ZS, HDB3)≈ N/2T1 (B8ZS), E1 (HDB3)
Example 1 (baud of Manchester): 10 Mbps Ethernet uses Manchester. Each bit has 2 signal elements (two halves), so the worst-case signal rate is 20 Mbaud. It needs about twice the bandwidth of NRZ. This is the price of self-clocking.
Example 2 (NRZ bandwidth): 1 Mbps NRZ. The fastest pattern 1010... is a square wave at 500 kHz. So the minimum bandwidth is about 500 kHz = N/2.
Example 3 (block coding): Fast Ethernet (100BASE-TX/FX family) uses 4B/5B: each 4 data bits are sent as 5 code bits so there are never too many 0s in a row. Line rate = \( 100 \times 5/4 = 125 \) Mbps. Then NRZ-I (or MLT-3) is used on top.
Example 1 (Manchester-এর baud): 10 Mbps Ethernet Manchester ব্যবহার করে। প্রতিটা bit-এ 2টা signal element (দুইটা অর্ধেক), তাই সবচেয়ে খারাপ ক্ষেত্রে signal rate 20 Mbaud। NRZ-এর প্রায় দ্বিগুণ bandwidth লাগে। Self-clocking-এর দাম এটাই।
Example 2 (NRZ bandwidth): 1 Mbps NRZ। সবচেয়ে দ্রুত pattern 1010... হলো 500 kHz-এর একটা square wave। তাই minimum bandwidth প্রায় 500 kHz = N/2।
Example 3 (block coding): Fast Ethernet (100BASE-TX/FX family) 4B/5B ব্যবহার করে: প্রতি 4টা data bit-কে 5টা code bit হিসেবে পাঠায়, যাতে পরপর বেশি 0 না থাকে। Line rate = \( 100 \times 5/4 = 125 \) Mbps। এর উপর NRZ-I (বা MLT-3) ব্যবহার হয়।
Exam tip: "Which code has no DC and is self-clocking?" → Manchester / Differential Manchester. "Which code gives error detection through alternate polarity?" → AMI. "In NRZ-I, what causes a transition?" → a 1. Always state your convention (for NRZ-L and Manchester) in written answers — examiners accept either if you are clear.
Exam tip: "কোন code-এ DC নেই আর self-clocking?" → Manchester / Differential Manchester। "কোন code পালা করে polarity দিয়ে error detection দেয়?" → AMI। "NRZ-I-এ transition হয় কীসে?" → একটা 1-এ। Written answer-এ সবসময় আপনার convention (NRZ-L আর Manchester-এর জন্য) লিখে দিন — পরিষ্কার বললে examiner যেকোনোটাই মেনে নেন।

6. Digital Modulation (ASK, FSK, PSK, QAM)6. Digital Modulation (ASK, FSK, PSK, QAM)

Line coding sends bits as baseband pulses on a wire. But radio, Wi-Fi, mobile and modems need a carrier. Digital modulation (also called digital-to-analog conversion or "keying") changes a carrier wave based on bits:

  • ASK (Amplitude Shift Keying): bits change the amplitude. The simplest form is OOK (On-Off Keying): carrier on = 1, off = 0. Used in fiber optics (light on/off). Weak against noise.
  • FSK (Frequency Shift Keying): bits change the frequency. For example \( f_1 \) for 1 and \( f_0 \) for 0. Robust, but uses more bandwidth. Used in old modems, Bluetooth (GFSK).
  • PSK (Phase Shift Keying): bits change the phase. In BPSK, 1 = phase 0°, 0 = phase 180°. Very robust against noise.

Line coding তারে baseband pulse হিসেবে bit পাঠায়। কিন্তু radio, Wi-Fi, mobile আর modem-এ একটা carrier লাগে। Digital modulation (একে digital-to-analog conversion বা "keying"-ও বলে) bit অনুযায়ী একটা carrier wave-কে বদলায়:

  • ASK (Amplitude Shift Keying): bit amplitude বদলায়। সবচেয়ে সহজ রূপ হলো OOK (On-Off Keying): carrier on = 1, off = 0। Fiber optics-এ ব্যবহার হয় (আলো on/off)। Noise-এ দুর্বল।
  • FSK (Frequency Shift Keying): bit frequency বদলায়। যেমন 1-এর জন্য \( f_1 \), 0-এর জন্য \( f_0 \)। শক্তপোক্ত, কিন্তু বেশি bandwidth লাগে। পুরনো modem, Bluetooth (GFSK)-এ ব্যবহার হয়।
  • PSK (Phase Shift Keying): bit phase বদলায়। BPSK-এ 1 = phase 0°, 0 = phase 180°। Noise-এর বিরুদ্ধে খুব শক্তপোক্ত।
10110ASK (OOK)FSKBPSK
The same bits 10110 sent by ASK (OOK), FSK and BPSK. In BPSK, look at the bit borders: the wave suddenly flips (180° jump) when the bit changes.একই bit 10110 পাঠানো হয়েছে ASK (OOK), FSK আর BPSK দিয়ে। BPSK-এ bit-এর সীমানায় দেখুন: bit বদলালে wave হঠাৎ উল্টে যায় (180° লাফ)।

M-ary modulation: more bits per symbolM-ary modulation: প্রতি symbol-এ বেশি bit

Instead of 2 choices, we can use \( M \) different signal shapes (called symbols). Each symbol then carries \( k = \log_2 M \) bits. The number of symbols per second is the baud rate (symbol rate). The number of bits per second is the bit rate:

2টা পছন্দের বদলে আমরা \( M \)টা আলাদা signal shape (যাকে symbol বলে) ব্যবহার করতে পারি। তখন প্রতিটা symbol \( k = \log_2 M \)টা bit বহন করে। প্রতি second-এ কতটা symbol, সেটা baud rate (symbol rate)। প্রতি second-এ কতটা bit, সেটা bit rate:

\[ k = \log_2 M \;\text{bits/symbol}, \qquad R_b = R_s \times \log_2 M \quad (\text{bit rate} = \text{baud} \times \text{bits per symbol}) \]
Examples:
  • 16-QAM at 2400 baud → \( 2400 \times \log_2 16 = 2400 \times 4 = 9600 \) bps.
  • QPSK carries 8000 bps → baud \( = 8000/2 = 4000 \) baud.
  • 64-QAM at 1 Mbaud → \( 1 \times 6 = 6 \) Mbps.
  • We want 3 bits in each symbol → \( M = 2^3 = 8 \) points (8-PSK or 8-QAM).
  • BPSK: 1 bit/symbol, so bit rate = baud rate. This is the only case where they are equal (with M = 2).
Example:
  • 2400 baud-এ 16-QAM → \( 2400 \times \log_2 16 = 2400 \times 4 = 9600 \) bps।
  • QPSK 8000 bps বহন করে → baud \( = 8000/2 = 4000 \) baud।
  • 1 Mbaud-এ 64-QAM → \( 1 \times 6 = 6 \) Mbps।
  • প্রতিটা symbol-এ 3 bit চাই → \( M = 2^3 = 8 \)টা point (8-PSK বা 8-QAM)।
  • BPSK: প্রতি symbol-এ 1 bit, তাই bit rate = baud rate। শুধু এই ক্ষেত্রেই (M = 2) দুটো সমান।

QPSK, M-PSK and QAM, with constellation diagramsQPSK, M-PSK আর QAM, constellation diagram সহ

A constellation diagram shows each symbol as a dot. The horizontal axis is I (in-phase, cosine part). The vertical axis is Q (quadrature, sine part). The distance from the center = amplitude; the angle = phase.

  • QPSK (4-PSK): 4 phases (45°, 135°, 225°, 315°), 2 bits per symbol. With Gray code, neighbours differ by only 1 bit, so a small error flips only 1 bit.
  • M-PSK: M points on a circle, spaced \( 360°/M \) apart. 8-PSK → 45° apart. As M grows, points get closer, so noise causes more errors.
  • QAM (Quadrature Amplitude Modulation): changes both amplitude and phase. Points form a grid. 16-QAM = 4 bits, 64-QAM = 6 bits, 256-QAM = 8 bits. Used in Wi-Fi, cable modems, 4G/5G, DSL.

Constellation diagram প্রতিটা symbol-কে একটা বিন্দু হিসেবে দেখায়। আনুভূমিক অক্ষ হলো I (in-phase, cosine অংশ)। উল্লম্ব অক্ষ হলো Q (quadrature, sine অংশ)। কেন্দ্র থেকে দূরত্ব = amplitude; কোণ = phase।

  • QPSK (4-PSK): 4টা phase (45°, 135°, 225°, 315°), প্রতি symbol-এ 2 bit। Gray code ব্যবহার করলে পাশের দুইটা point-এ মাত্র 1 bit পার্থক্য থাকে, তাই ছোট একটা error শুধু 1টা bit উল্টায়।
  • M-PSK: একটা বৃত্তের উপর Mটা point, \( 360°/M \) দূরে দূরে। 8-PSK → 45° দূরে। M বাড়লে point গুলো কাছাকাছি আসে, তাই noise-এ বেশি error হয়।
  • QAM (Quadrature Amplitude Modulation): amplitude আর phase দুটোই বদলায়। Point গুলো একটা grid বানায়। 16-QAM = 4 bit, 64-QAM = 6 bit, 256-QAM = 8 bit। Wi-Fi, cable modem, 4G/5G, DSL-এ ব্যবহার হয়।
BPSK (M=2, 1 bit)IQ01phase 180° apartQPSK (M=4, 2 bits)IQ0001111090° apart, Gray code16-QAM (M=16, 4 bits)IQ4 × 4 grid: amplitude + phase
Constellation diagrams. BPSK: 2 points (1 bit). QPSK: 4 points with Gray code labels (2 bits). 16-QAM: a 4×4 grid (4 bits). More points = more bits per symbol, but points sit closer together.Constellation diagram। BPSK: 2টা point (1 bit)। QPSK: Gray code label সহ 4টা point (2 bit)। 16-QAM: একটা 4×4 grid (4 bit)। বেশি point = প্রতি symbol-এ বেশি bit, কিন্তু point গুলো কাছাকাছি বসে।

Bandwidth and bandwidth efficiencyBandwidth এবং bandwidth efficiency

The bandwidth of ASK/PSK/QAM depends on the baud rate S, not the bit rate. With a filter roll-off factor \( d \) (between 0 and 1):

ASK/PSK/QAM-এর bandwidth নির্ভর করে baud rate S-এর উপর, bit rate-এর উপর না। Filter-এর roll-off factor \( d \) (0 থেকে 1-এর মধ্যে) থাকলে:

\[ B_{ASK/PSK/QAM} = (1 + d)\,S, \qquad B_{BFSK} = (1 + d)\,S + 2\Delta f, \qquad \eta_{BW} = \frac{R_b}{B}\;\text{bps/Hz} \]
Example 1 (same bit rate, different M): We need 1 Mbps with \( d = 1 \).
  • BPSK: S = 1 Mbaud → B = 2 × 1 = 2 MHz. Efficiency = 1/2 = 0.5 bps/Hz.
  • QPSK: S = 0.5 Mbaud → B = 1 MHz. Efficiency = 1 bps/Hz.
  • 16-QAM: S = 0.25 Mbaud → B = 0.5 MHz. Efficiency = 2 bps/Hz.
With ideal filters (\( d = 0 \)), efficiency = \( \log_2 M \): BPSK 1, QPSK 2, 16-QAM 4, 64-QAM 6 bps/Hz.
Example 2 (FSK): Available band 200–300 kHz (100 kHz). BFSK with carriers at 225 and 275 kHz (\( 2\Delta f = 50 \) kHz) and \( d = 1 \). \( 100 = 2S + 50 \Rightarrow S = 25 \) kbaud. BFSK has 1 bit/symbol, so bit rate = 25 kbps.
Example 1 (একই bit rate, আলাদা M): \( d = 1 \) সহ 1 Mbps দরকার।
  • BPSK: S = 1 Mbaud → B = 2 × 1 = 2 MHz। Efficiency = 1/2 = 0.5 bps/Hz।
  • QPSK: S = 0.5 Mbaud → B = 1 MHz। Efficiency = 1 bps/Hz।
  • 16-QAM: S = 0.25 Mbaud → B = 0.5 MHz। Efficiency = 2 bps/Hz।
Ideal filter (\( d = 0 \)) হলে efficiency = \( \log_2 M \): BPSK 1, QPSK 2, 16-QAM 4, 64-QAM 6 bps/Hz।
Example 2 (FSK): পাওয়া band 200–300 kHz (100 kHz)। BFSK, carrier 225 আর 275 kHz-এ (\( 2\Delta f = 50 \) kHz) আর \( d = 1 \)। \( 100 = 2S + 50 \Rightarrow S = 25 \) kbaud। BFSK-এ প্রতি symbol-এ 1 bit, তাই bit rate = 25 kbps।
SchemeScheme M Bits/symbolBit/symbol Ideal efficiency (bps/Hz)Ideal efficiency (bps/Hz) Noise robustnessNoise-এ টিকে থাকা
BPSK211Bestসবচেয়ে ভালো
QPSK422Very good (same BER as BPSK per bit)খুব ভালো (প্রতি bit-এ BPSK-এর সমান BER)
8-PSK833Mediumমাঝারি
16-QAM1644Needs higher SNRবেশি SNR লাগে
64-QAM6466Needs high SNRঅনেক SNR লাগে
256-QAM25688Needs very high SNRখুব বেশি SNR লাগে

The trade-off: bigger M packs more bits into the same bandwidth, but the points are closer, so a little noise can push a point to its neighbour. That is why Wi-Fi and 4G use adaptive modulation: 256-QAM when you are near the router (high SNR), and QPSK or BPSK when you are far away (low SNR).

Trade-off: বড় M একই bandwidth-এ বেশি bit ঢোকায়, কিন্তু point গুলো কাছাকাছি থাকে, তাই অল্প noise-ও একটা point-কে পাশের point-এ ঠেলে দিতে পারে। এই কারণেই Wi-Fi আর 4G adaptive modulation ব্যবহার করে: router-এর কাছে থাকলে (বেশি SNR) 256-QAM, আর দূরে থাকলে (কম SNR) QPSK বা BPSK।

Exam trap — baud vs bit rate: baud = symbols per second; bit rate = bits per second. Bit rate = baud × \( \log_2 M \). "A modem sends 2400 baud using 16-QAM" → 9600 bps, not 2400 bps. Bandwidth depends on the baud rate, so higher M gives more bits in the same bandwidth. Also: \( \log_2 M \), not M — 16-QAM carries 4 bits, not 16.
Exam-এর ফাঁদ — baud বনাম bit rate: baud = প্রতি second-এ symbol; bit rate = প্রতি second-এ bit। Bit rate = baud × \( \log_2 M \)। "একটা modem 16-QAM দিয়ে 2400 baud পাঠায়" → 9600 bps, 2400 bps নয়। Bandwidth নির্ভর করে baud rate-এর উপর, তাই বড় M একই bandwidth-এ বেশি bit দেয়। আরও: \( \log_2 M \), M নয় — 16-QAM বহন করে 4 bit, 16 bit নয়।

7. Noise and Channel Capacity7. Noise এবং Channel Capacity

Types of noiseNoise-এর ধরন

Noise is any unwanted signal that gets added to our signal. Main types:

  • Thermal (Johnson) noise: electrons move randomly because of heat. It is in every wire and every resistor. It is spread evenly over all frequencies, so it is called white noise. It can never be removed completely.
  • Shot noise: random arrival of electrons in diodes and transistors.
  • Intermodulation noise: two signals mix in a non-linear device and make new frequencies (like \( f_1 + f_2 \)).
  • Crosstalk: a signal from one wire leaks into a nearby wire.
  • Impulse noise: short, strong spikes (lightning, switches). It destroys bursts of bits.

Noise হলো যেকোনো অনাকাঙ্ক্ষিত signal যা আমাদের signal-এর সাথে যোগ হয়ে যায়। প্রধান ধরন:

  • Thermal (Johnson) noise: তাপের কারণে electron এলোমেলোভাবে নড়ে। এটা প্রতিটা তারে আর প্রতিটা resistor-এ থাকে। সব frequency-তে সমানভাবে ছড়ানো, তাই একে white noise বলে। এটা কখনো পুরোপুরি দূর করা যায় না।
  • Shot noise: diode আর transistor-এ electron-এর এলোমেলো আগমন।
  • Intermodulation noise: দুইটা signal একটা non-linear device-এ মিশে নতুন frequency বানায় (যেমন \( f_1 + f_2 \))।
  • Crosstalk: এক তারের signal পাশের তারে চুইয়ে যায়।
  • Impulse noise: ছোট কিন্তু শক্তিশালী spike (বজ্রপাত, switch)। একসাথে অনেকগুলো bit নষ্ট করে।

Thermal noise power: N = kTBThermal noise power: N = kTB

\[ N = kTB, \qquad k = 1.38\times10^{-23}\ \text{J/K}, \qquad N_0 = kT \ (\text{W/Hz}) \]

T is temperature in kelvin (room temperature is usually taken as 290 K), and B is the bandwidth in Hz. Noise grows with bandwidth — a wider receiver lets in more noise. A useful shortcut: at 290 K, \( kT = -174 \) dBm/Hz, so \( N(\text{dBm}) = -174 + 10\log_{10} B \).

T হলো kelvin-এ temperature (room temperature সাধারণত 290 K ধরা হয়), আর B হলো Hz-এ bandwidth। Bandwidth বাড়লে noise বাড়ে — চওড়া receiver বেশি noise ঢুকতে দেয়। একটা কাজের shortcut: 290 K-এ \( kT = -174 \) dBm/Hz, তাই \( N(\text{dBm}) = -174 + 10\log_{10} B \)।

Example: A receiver at T = 290 K with B = 1 MHz.
\( N = 1.38\times10^{-23} \times 290 \times 10^6 = 4.0\times10^{-15} \) W.
In dBm: \( 10\log(4.0\times10^{-15}/10^{-3}) \approx -114 \) dBm. Shortcut check: \( -174 + 10\log 10^6 = -174 + 60 = -114 \) dBm. ✓
If B becomes 10 MHz, N becomes 10 times bigger: \( 4.0\times10^{-14} \) W = −104 dBm.
Example: T = 290 K আর B = 1 MHz-এর একটা receiver।
\( N = 1.38\times10^{-23} \times 290 \times 10^6 = 4.0\times10^{-15} \) W।
dBm-এ: \( 10\log(4.0\times10^{-15}/10^{-3}) \approx -114 \) dBm। Shortcut দিয়ে যাচাই: \( -174 + 10\log 10^6 = -174 + 60 = -114 \) dBm। ✓
B যদি 10 MHz হয়, N 10 গুণ বাড়ে: \( 4.0\times10^{-14} \) W = −104 dBm।

Signal-to-noise ratio (SNR)Signal-to-noise ratio (SNR)

\[ \text{SNR} = \frac{P_{signal}}{P_{noise}}, \qquad \text{SNR}_{dB} = 10\log_{10}\text{SNR}, \qquad \text{SNR} = 10^{\,\text{SNR}_{dB}/10} \]
Examples: Signal 10 mW, noise 1 µW → SNR = \( 10^{-2}/10^{-6} = 10^4 \) → 40 dB. Going back: 30 dB → SNR = \( 10^{3} = 1000 \); 20 dB → 100; 0 dB → 1 (signal = noise).
Noise figure (bonus): a device that makes SNR worse has noise factor \( F = \text{SNR}_{in}/\text{SNR}_{out} \). If SNRin = 40 dB and SNRout = 34 dB, the noise figure NF = 40 − 34 = 6 dB.
Example: Signal 10 mW, noise 1 µW → SNR = \( 10^{-2}/10^{-6} = 10^4 \) → 40 dB। উল্টো দিকে: 30 dB → SNR = \( 10^{3} = 1000 \); 20 dB → 100; 0 dB → 1 (signal = noise)।
Noise figure (বাড়তি): যে device SNR খারাপ করে, তার noise factor \( F = \text{SNR}_{in}/\text{SNR}_{out} \)। SNRin = 40 dB আর SNRout = 34 dB হলে noise figure NF = 40 − 34 = 6 dB।

Nyquist bit rate (noiseless channel)Nyquist bit rate (noiseless channel)

For a perfect channel with no noise, bandwidth B and M signal levels, the maximum bit rate is:

Noise ছাড়া একটা নিখুঁত channel-এ, bandwidth B আর Mটা signal level থাকলে, সর্বোচ্চ bit rate হলো:

\[ C_{Nyquist} = 2B\log_2 M \]
Examples:
  • B = 3000 Hz, 2 levels → \( 2 \times 3000 \times 1 = 6000 \) bps.
  • Same channel, 4 levels → \( 2 \times 3000 \times 2 = 12{,}000 \) bps.
  • How many levels to send 20 kbps over 5 kHz? \( 20000 = 2 \times 5000 \times \log_2 M \Rightarrow \log_2 M = 2 \Rightarrow M = 4 \).
By Nyquist alone, adding more levels seems to give unlimited speed. But in real life noise makes close levels impossible to tell apart. That is where Shannon comes in.
Example:
  • B = 3000 Hz, 2 level → \( 2 \times 3000 \times 1 = 6000 \) bps।
  • একই channel, 4 level → \( 2 \times 3000 \times 2 = 12{,}000 \) bps।
  • 5 kHz দিয়ে 20 kbps পাঠাতে কতটা level লাগবে? \( 20000 = 2 \times 5000 \times \log_2 M \Rightarrow \log_2 M = 2 \Rightarrow M = 4 \)।
শুধু Nyquist দেখলে মনে হয় level বাড়ালেই অসীম speed পাওয়া যাবে। কিন্তু বাস্তবে noise-এর কারণে কাছাকাছি level আলাদা করে চেনা যায় না। এখানেই Shannon আসেন।

Shannon capacity (noisy channel)Shannon capacity (noisy channel)

Claude Shannon found the maximum possible error-free bit rate of a channel with bandwidth B and signal-to-noise ratio SNR (with white Gaussian noise):

Claude Shannon বের করেছিলেন bandwidth B আর signal-to-noise ratio SNR (white Gaussian noise সহ) থাকলে একটা channel-এর সর্বোচ্চ সম্ভাব্য error-free bit rate:

\[ C = B\log_2(1 + \text{SNR}) \quad \text{(SNR as a plain ratio, NOT in dB)} \]
Example 1 (classic phone line): B = 3 kHz, SNR = 30 dB.
Step 1: convert dB → ratio: \( \text{SNR} = 10^{30/10} = 1000 \).
Step 2: \( C = 3000 \times \log_2(1001) = 3000 \times 9.967 \approx 29{,}900 \) bps ≈ 30 kbps.
This is why old dial-up modems got stuck near 28.8–33.6 kbps.
Quick shortcut (for large SNR): \( C \approx B \times \text{SNR}_{dB}/3 \), because every 3 dB ≈ 1 bit/s/Hz. Check: \( 3000 \times 30/3 = 30{,}000 \). ✓
Example 2: B = 4 kHz, SNR = 15 → \( C = 4000 \times \log_2 16 = 4000 \times 4 = 16 \) kbps.
Example 3: SNR = 0 (signal is buried in noise) → \( \log_2 1 = 0 \) → C = 0. Nothing gets through.
Example 1 (পুরনো phone line): B = 3 kHz, SNR = 30 dB।
ধাপ 1: dB থেকে ratio: \( \text{SNR} = 10^{30/10} = 1000 \)।
ধাপ 2: \( C = 3000 \times \log_2(1001) = 3000 \times 9.967 \approx 29{,}900 \) bps ≈ 30 kbps।
এই কারণেই পুরনো dial-up modem 28.8–33.6 kbps-এর কাছে আটকে গিয়েছিল।
দ্রুত shortcut (বড় SNR-এর জন্য): \( C \approx B \times \text{SNR}_{dB}/3 \), কারণ প্রতি 3 dB ≈ 1 bit/s/Hz। যাচাই: \( 3000 \times 30/3 = 30{,}000 \)। ✓
Example 2: B = 4 kHz, SNR = 15 → \( C = 4000 \times \log_2 16 = 4000 \times 4 = 16 \) kbps।
Example 3: SNR = 0 (signal noise-এর নিচে চাপা) → \( \log_2 1 = 0 \) → C = 0। কিছুই যায় না।
Example 4 (use both formulas — a favourite written question): A channel has B = 1 MHz and SNR = 63.
Shannon upper limit: \( C = 10^6 \log_2(64) = 6 \) Mbps.
We never run exactly at the limit, so choose a safer 4 Mbps. Now use Nyquist to get the levels: \( 4\times10^6 = 2 \times 10^6 \times \log_2 M \Rightarrow \log_2 M = 2 \Rightarrow M = 4 \) levels.
(If we did aim for 6 Mbps: \( \log_2 M = 3 \Rightarrow M = 8 \).)
Example 4 (দুইটা formula একসাথে — written-এর প্রিয় প্রশ্ন): একটা channel-এ B = 1 MHz আর SNR = 63।
Shannon-এর উপরের সীমা: \( C = 10^6 \log_2(64) = 6 \) Mbps।
আমরা কখনো ঠিক সীমায় চালাই না, তাই নিরাপদ 4 Mbps বেছে নিই। এখন level বের করতে Nyquist: \( 4\times10^6 = 2 \times 10^6 \times \log_2 M \Rightarrow \log_2 M = 2 \Rightarrow M = 4 \) level।
(যদি 6 Mbps-ই লক্ষ্য হতো: \( \log_2 M = 3 \Rightarrow M = 8 \)।)

Why Shannon is an upper boundShannon কেন একটা upper bound

  • Shannon's C is a theoretical limit. No coding or modulation can send error-free data faster than C. Real systems always run below it.
  • Shannon only says the limit exists; he does not tell us which code reaches it. Modern codes (Turbo, LDPC, Polar) get very close — within a fraction of a dB.
  • To increase C, increase B (linear gain) or SNR (log gain). Doubling SNR adds only about 1 bit/s/Hz, but doubling B doubles C (if SNR stays the same — in reality more B also lets in more noise).
  • Nyquist gives the limit set by levels and bandwidth; Shannon gives the limit set by noise. The real limit is the smaller of the two.
  • Shannon-এর C একটা theoretical সীমা। কোনো coding বা modulation C-এর চেয়ে দ্রুত error-free data পাঠাতে পারে না। বাস্তব system সবসময় এর নিচে চলে।
  • Shannon শুধু বলেছেন সীমাটা আছে; কোন code দিয়ে সেখানে পৌঁছানো যায় তা বলেননি। আধুনিক code (Turbo, LDPC, Polar) খুব কাছে পৌঁছে যায় — এক dB-এর ভগ্নাংশের মধ্যে।
  • C বাড়াতে B বাড়ান (linear লাভ) অথবা SNR বাড়ান (log লাভ)। SNR দ্বিগুণ করলে মাত্র প্রায় 1 bit/s/Hz বাড়ে, কিন্তু B দ্বিগুণ করলে C দ্বিগুণ হয় (যদি SNR একই থাকে — বাস্তবে বেশি B বেশি noise-ও ঢোকায়)।
  • Nyquist দেয় level আর bandwidth-এর সীমা; Shannon দেয় noise-এর সীমা। আসল সীমা হলো দুটোর মধ্যে ছোটটা।
Pointবিষয় Nyquist Shannon
ChannelChannelNoiseless (ideal)Noiseless (ideal)Noisy (real)Noisy (বাস্তব)
FormulaFormula\( 2B\log_2 M \)\( B\log_2(1+\text{SNR}) \)
Depends onনির্ভর করেB and number of levels MB আর level সংখ্যা MB and SNRB আর SNR
Tells youকী বলেHow many levels you need for a bit rateএকটা bit rate-এর জন্য কতটা level লাগবেThe absolute max bit rate possibleসম্ভাব্য সর্বোচ্চ bit rate

Bit error rate (BER) and Eb/N0Bit error rate (BER) এবং Eb/N0

BER = number of wrong bits ÷ total bits sent. It tells how reliable a digital link is. Higher SNR → lower BER. For the same SNR, BPSK has lower BER than 16-QAM (points are further apart).

Digital systems often use \( E_b/N_0 \) (energy per bit ÷ noise density), which is SNR "per bit": \( E_b/N_0 = \text{SNR} \times B/R_b \).

BER = ভুল bit-এর সংখ্যা ÷ মোট পাঠানো bit। Digital link কতটা নির্ভরযোগ্য তা বলে। বেশি SNR → কম BER। একই SNR-এ BPSK-এর BER 16-QAM-এর চেয়ে কম (point গুলো দূরে দূরে)।

Digital system প্রায়ই \( E_b/N_0 \) (প্রতি bit-এর energy ÷ noise density) ব্যবহার করে, যা "প্রতি bit-এর" SNR: \( E_b/N_0 = \text{SNR} \times B/R_b \)।

Example: 5 errors in \( 2\times10^6 \) bits → BER \( = 5/(2\times10^6) = 2.5\times10^{-6} \).
SNR = 10 (10 dB), B = 1 MHz, \( R_b = 2 \) Mbps → \( E_b/N_0 = 10 \times 1/2 = 5 \) → about 7 dB.
Example: \( 2\times10^6 \) bit-এ 5টা error → BER \( = 5/(2\times10^6) = 2.5\times10^{-6} \)।
SNR = 10 (10 dB), B = 1 MHz, \( R_b = 2 \) Mbps → \( E_b/N_0 = 10 \times 1/2 = 5 \) → প্রায় 7 dB।
Exam traps: (1) In Shannon, convert dB to a ratio first. Putting 30 instead of 1000 is the most common mistake. (2) Nyquist bit rate has a factor 2B; Shannon has only B. (3) Don't mix up the Nyquist sampling theorem (\( f_s \ge 2f_{max} \)) with the Nyquist bit rate (\( 2B\log_2 M \)). (4) Temperature in N = kTB must be in kelvin: 27 °C = 300 K.
Exam-এর ফাঁদ: (1) Shannon-এ আগে dB-কে ratio-তে বদলান। 1000-এর বদলে 30 বসানো সবচেয়ে বেশি হওয়া ভুল। (2) Nyquist bit rate-এ factor 2B; Shannon-এ শুধু B। (3) Nyquist sampling theorem (\( f_s \ge 2f_{max} \)) আর Nyquist bit rate (\( 2B\log_2 M \)) গুলিয়ে ফেলবেন না। (4) N = kTB-তে temperature kelvin-এ হতে হবে: 27 °C = 300 K।

8. Multiplexing and Multiple Access8. Multiplexing এবং Multiple Access

Multiplexing means sending many signals over one shared link. A MUX combines them at the sender; a DEMUX separates them at the receiver. When many users (like mobile phones) share one medium, we call it multiple access (FDMA, TDMA, CDMA, OFDMA).

Multiplexing মানে একটা shared link দিয়ে অনেকগুলো signal পাঠানো। Sender-এ একটা MUX এগুলোকে একসাথে করে; receiver-এ একটা DEMUX আলাদা করে। যখন অনেক user (যেমন mobile phone) একটা medium share করে, তখন একে বলে multiple access (FDMA, TDMA, CDMA, OFDMA)।

FDM: each user gets its own frequency band, all the timetime →frequency →User 4 (guard band between)User 3 (guard band between)User 2 (guard band between)User 1 (guard band between)TDM: each user gets the whole band, in its own time slottime →frequency →U1U2U3U4U1U2U3U4
FDM splits the frequency band; every user talks all the time in its own band. TDM splits time; every user gets the full band but only in its own slot.FDM frequency band ভাগ করে; প্রতিটা user নিজের band-এ সবসময় কথা বলে। TDM সময় ভাগ করে; প্রতিটা user পুরো band পায়, কিন্তু শুধু নিজের slot-এ।

FDM (Frequency Division Multiplexing)FDM (Frequency Division Multiplexing)

Each signal is moved (modulated) to a different carrier frequency. Small empty gaps called guard bands are left between channels so they do not overlap. Examples: AM/FM radio, cable TV, old analog telephone trunks.

প্রতিটা signal-কে আলাদা carrier frequency-তে সরানো (modulate করা) হয়। Channel গুলোর মাঝে ছোট ফাঁকা জায়গা রাখা হয়, একে বলে guard band, যাতে একটা আরেকটার উপর না পড়ে। উদাহরণ: AM/FM radio, cable TV, পুরনো analog telephone trunk।

\[ B_{total} = n \cdot B_{ch} + (n-1)\cdot B_{guard} \]
Example: 5 channels, each 100 kHz, with a 10 kHz guard band between them. There are 4 gaps. \( B = 5\times100 + 4\times10 = 540 \) kHz.
Another: 12 voice channels of 4 kHz each (guard included) → 48 kHz. This is the classic telephone "group" (placed at 60–108 kHz).
Example: 5টা channel, প্রতিটা 100 kHz, মাঝে 10 kHz guard band। ফাঁক আছে 4টা। \( B = 5\times100 + 4\times10 = 540 \) kHz।
আরেকটা: 4 kHz-এর 12টা voice channel (guard সহ) → 48 kHz। এটাই পুরনো telephone-এর "group" (60–108 kHz-এ বসানো)।

WDM (Wavelength Division Multiplexing)WDM (Wavelength Division Multiplexing)

WDM is FDM for light in optical fiber. Each signal uses a different wavelength (colour) of light. A prism-like device joins and splits them. DWDM (Dense WDM) packs many wavelengths very close.

WDM হলো optical fiber-এর আলোর জন্য FDM। প্রতিটা signal আলাদা wavelength (রং)-এর আলো ব্যবহার করে। Prism-এর মতো একটা device এগুলোকে জোড়া দেয় আর আলাদা করে। DWDM (Dense WDM) অনেক wavelength খুব কাছাকাছি বসায়।

Example: A fiber carries 40 wavelengths, each at 10 Gbps → total \( 40 \times 10 = 400 \) Gbps in one fiber.
Example: একটা fiber 40টা wavelength বহন করে, প্রতিটা 10 Gbps → একটা fiber-এ মোট \( 40 \times 10 = 400 \) Gbps।

TDM: synchronous and statisticalTDM: synchronous এবং statistical

  • Synchronous TDM: every input gets a fixed slot in every frame, even if it has nothing to send. Simple, but slots are wasted when users are idle. The link rate = sum of input rates + framing bits.
  • Statistical (asynchronous) TDM: slots are given only to inputs that have data. Each slot must carry an address to show who owns it. Better use of the link; the link can be slower than the sum of all inputs.
  • Synchronous TDM: প্রতিটা input প্রতিটা frame-এ একটা নির্দিষ্ট slot পায়, পাঠানোর কিছু না থাকলেও। সহজ, কিন্তু user চুপ থাকলে slot নষ্ট হয়। Link rate = সব input rate-এর যোগফল + framing bit।
  • Statistical (asynchronous) TDM: শুধু যাদের data আছে তারাই slot পায়। প্রতিটা slot-এ একটা address থাকতে হয়, কার slot তা বোঝাতে। Link-এর ভালো ব্যবহার; link-এর speed সব input-এর যোগফলের চেয়ে কম হলেও চলে।
Example (synchronous TDM): 4 sources, each 250 kbps. Each slot holds 1 bit, and each frame has 1 extra sync bit.
  • Frame rate = rate of one source ÷ bits per slot = 250,000 frames/s.
  • Frame size = 4 × 1 + 1 = 5 bits.
  • Frame duration = 1/250,000 = 4 µs.
  • Link rate = 250,000 × 5 = 1.25 Mbps.
Example (synchronous TDM): 4টা source, প্রতিটা 250 kbps। প্রতিটা slot-এ 1 bit, আর প্রতিটা frame-এ 1টা বাড়তি sync bit।
  • Frame rate = একটা source-এর rate ÷ প্রতি slot-এ bit = 250,000 frame/s।
  • Frame size = 4 × 1 + 1 = 5 bit।
  • Frame duration = 1/250,000 = 4 µs।
  • Link rate = 250,000 × 5 = 1.25 Mbps।

T1 and E1 frame mathT1 আর E1 frame-এর হিসাব

Digital telephone trunks are synchronous TDM of 64 kbps PCM voice channels (DS0). Each channel gives one 8-bit sample every 125 µs (8000 times per second).

Digital telephone trunk হলো 64 kbps PCM voice channel (DS0)-এর synchronous TDM। প্রতিটা channel প্রতি 125 µs-এ (প্রতি second-এ 8000 বার) একটা 8-bit sample দেয়।

\[ \text{T1: } (24 \times 8 + 1)\ \tfrac{\text{bits}}{\text{frame}} \times 8000\ \tfrac{\text{frames}}{\text{s}} = 193 \times 8000 = 1.544\ \text{Mbps} \]
\[ \text{E1: } 32 \times 8 \times 8000 = 2.048\ \text{Mbps} \quad (30 \text{ voice} + 2 \text{ control channels}) \]
Example (T1 breakdown): 24 channels × 64 kbps = 1.536 Mbps of voice. The 1 framing bit per frame adds 1 × 8000 = 8 kbps. Total = 1.544 Mbps. Frame time = 1/8000 = 125 µs. Efficiency = 1.536/1.544 = 99.5%.
E1: 32 time slots; slot 0 is for framing/sync and slot 16 is for signalling, so 30 slots carry voice → 30 × 64 = 1.92 Mbps of voice inside 2.048 Mbps. T1 is used in North America/Japan; E1 in Europe and Bangladesh.
Example (T1 ভেঙে দেখা): 24 channel × 64 kbps = 1.536 Mbps voice। প্রতি frame-এ 1টা framing bit যোগ করে 1 × 8000 = 8 kbps। মোট = 1.544 Mbps। Frame time = 1/8000 = 125 µs। Efficiency = 1.536/1.544 = 99.5%।
E1: 32টা time slot; slot 0 framing/sync-এর জন্য আর slot 16 signalling-এর জন্য, তাই 30টা slot voice বহন করে → 2.048 Mbps-এর মধ্যে 30 × 64 = 1.92 Mbps voice। T1 ব্যবহার হয় North America/Japan-এ; E1 Europe আর বাংলাদেশে।

CDMA idea (Code Division Multiple Access)CDMA-এর ধারণা (Code Division Multiple Access)

In CDMA, all users send at the same time on the same frequency. Each user has a unique code (chip sequence). Codes are orthogonal: multiply two different codes element by element and add → 0. The receiver multiplies the mixed signal by the wanted user's code; other users cancel out. Like a party where everyone speaks a different language — you only understand your own.

CDMA-তে সব user একই সময়ে একই frequency-তে পাঠায়। প্রতিটা user-এর একটা আলাদা code (chip sequence) থাকে। Code গুলো orthogonal: দুইটা আলাদা code-কে element ধরে গুণ করে যোগ করলে → 0। Receiver মেশানো signal-কে কাঙ্ক্ষিত user-এর code দিয়ে গুণ করে; বাকি user-রা বাতিল হয়ে যায়। অনেকটা একটা party-র মতো, যেখানে সবাই আলাদা ভাষায় কথা বলছে — আপনি শুধু নিজের ভাষাটা বোঝেন।

Example (2 users, Walsh codes): Code A = [+1, +1], code B = [+1, −1]. Bit 1 → +1, bit 0 → −1.
A sends 1: A × (+1) = [+1, +1]. B sends 0: B × (−1) = [−1, +1]. Channel adds them: [0, +2].
Decode A: ([0, 2]·[1, 1]) / 2 = (0 + 2)/2 = +1 → bit 1. ✓
Decode B: ([0, 2]·[1, −1]) / 2 = (0 − 2)/2 = −1 → bit 0. ✓
Processing gain: IS-95 CDMA: chip rate 1.2288 Mcps, data 9.6 kbps → gain = 1,228,800/9600 = 128 ≈ 21.1 dB. CDMA phones use soft handoff (connected to 2 cells at once while moving).
Example (2 user, Walsh code): Code A = [+1, +1], code B = [+1, −1]। Bit 1 → +1, bit 0 → −1।
A পাঠায় 1: A × (+1) = [+1, +1]। B পাঠায় 0: B × (−1) = [−1, +1]। Channel এগুলো যোগ করে: [0, +2]।
A decode: ([0, 2]·[1, 1]) / 2 = (0 + 2)/2 = +1 → bit 1। ✓
B decode: ([0, 2]·[1, −1]) / 2 = (0 − 2)/2 = −1 → bit 0। ✓
Processing gain: IS-95 CDMA: chip rate 1.2288 Mcps, data 9.6 kbps → gain = 1,228,800/9600 = 128 ≈ 21.1 dB। CDMA phone soft handoff ব্যবহার করে (চলার সময় একসাথে 2টা cell-এর সাথে যুক্ত থাকে)।

OFDM ideaOFDM-এর ধারণা

OFDM (Orthogonal Frequency Division Multiplexing) splits one fast data stream into many slow streams, each on its own narrow subcarrier. Unlike normal FDM, the subcarriers overlap but do not disturb each other, because they are spaced exactly \( \Delta f = 1/T \) apart (T = symbol time) — they are orthogonal. No guard bands are needed, so it saves bandwidth. Slow symbols also resist multipath echoes. It is built with the FFT. Used in Wi-Fi, 4G LTE, 5G, DSL and digital TV. OFDMA gives different subcarriers to different users.

OFDM (Orthogonal Frequency Division Multiplexing) একটা দ্রুত data stream-কে অনেকগুলো ধীর stream-এ ভাগ করে, প্রতিটা নিজের সরু subcarrier-এ। সাধারণ FDM-এর মতো নয়, এখানে subcarrier গুলো একটার উপর আরেকটা পড়ে (overlap), কিন্তু একে অপরকে বিরক্ত করে না, কারণ এরা ঠিক \( \Delta f = 1/T \) দূরে দূরে (T = symbol time) — এরা orthogonal। Guard band লাগে না, তাই bandwidth বাঁচে। ধীর symbol multipath প্রতিধ্বনিও ঠেকায়। FFT দিয়ে বানানো হয়। Wi-Fi, 4G LTE, 5G, DSL আর digital TV-তে ব্যবহার হয়। OFDMA আলাদা user-কে আলাদা subcarrier দেয়।

Example: Wi-Fi (802.11a/g) uses a 20 MHz channel with 64 subcarriers. Spacing = 20 MHz / 64 = 312.5 kHz. Useful symbol time = 1/312.5 kHz = 3.2 µs. LTE uses 15 kHz spacing → symbol time ≈ 66.7 µs.
Example: Wi-Fi (802.11a/g) 64টা subcarrier সহ 20 MHz channel ব্যবহার করে। Spacing = 20 MHz / 64 = 312.5 kHz। Useful symbol time = 1/312.5 kHz = 3.2 µs। LTE 15 kHz spacing ব্যবহার করে → symbol time ≈ 66.7 µs।

Cellular concepts: cell, frequency reuse, handoffCellular ধারণা: cell, frequency reuse, handoff

  • Cell: the area covered by one base station (drawn as a hexagon). Many small low-power cells cover a city.
  • Cluster and frequency reuse: the total channels are divided among N cells called a cluster. The same set of frequencies is reused in the next cluster, far enough away to avoid interference. Allowed cluster sizes: \( N = i^2 + ij + j^2 \) → 1, 3, 4, 7, 12, ...
  • Reuse distance: \( D/R = \sqrt{3N} \) (R = cell radius). Bigger N → co-channel cells further apart → less interference, but fewer channels per cell.
  • Handoff (handover): when you move from one cell to another during a call, the call is passed to the new base station. Hard handoff = break then make (GSM). Soft handoff = make then break (CDMA).
  • Cell splitting: break a busy cell into smaller cells to add capacity.
  • Cell: একটা base station যে এলাকা cover করে (hexagon হিসেবে আঁকা হয়)। অনেকগুলো ছোট, কম power-এর cell মিলে একটা শহর cover করে।
  • Cluster এবং frequency reuse: মোট channel গুলো Nটা cell-এর মধ্যে ভাগ করা হয়, এদের বলে cluster। একই frequency-র set পরের cluster-এ আবার reuse করা হয়, যথেষ্ট দূরে যাতে interference না হয়। অনুমোদিত cluster size: \( N = i^2 + ij + j^2 \) → 1, 3, 4, 7, 12, ...
  • Reuse distance: \( D/R = \sqrt{3N} \) (R = cell radius)। বড় N → co-channel cell আরও দূরে → কম interference, কিন্তু প্রতি cell-এ কম channel।
  • Handoff (handover): call চলাকালে এক cell থেকে আরেক cell-এ গেলে call নতুন base station-এর কাছে হস্তান্তর হয়। Hard handoff = আগে ছাড়ো তারপর ধরো (GSM)। Soft handoff = আগে ধরো তারপর ছাড়ো (CDMA)।
  • Cell splitting: ব্যস্ত একটা cell-কে ছোট ছোট cell-এ ভাগ করে capacity বাড়ানো।
Example: An operator has 33 MHz. A full-duplex channel uses 2 × 25 kHz = 50 kHz. Total channels = 33,000/50 = 660.
  • N = 7: channels per cell = 660/7 ≈ 94. \( D/R = \sqrt{21} \approx 4.58 \).
  • N = 4: channels per cell = 660/4 = 165 (more capacity, but more interference; \( D/R = \sqrt{12} \approx 3.46 \)).
Example: একটা operator-এর কাছে 33 MHz আছে। একটা full-duplex channel ব্যবহার করে 2 × 25 kHz = 50 kHz। মোট channel = 33,000/50 = 660।
  • N = 7: প্রতি cell-এ channel = 660/7 ≈ 94। \( D/R = \sqrt{21} \approx 4.58 \)।
  • N = 4: প্রতি cell-এ channel = 660/4 = 165 (বেশি capacity, কিন্তু বেশি interference; \( D/R = \sqrt{12} \approx 3.46 \))।

Comparison of multiplexing / multiple accessMultiplexing / multiple access-এর তুলনা

Methodপদ্ধতি What is shared / dividedকী ভাগ করা হয় Key featureমূল বৈশিষ্ট্য Exampleউদাহরণ
FDM / FDMAFrequencyGuard bands; analog friendlyGuard band; analog-এর জন্য সুবিধাজনকRadio, cable TV, 1G (AMPS)Radio, cable TV, 1G (AMPS)
WDMWavelength (light)FDM for fiberFiber-এর জন্য FDMBackbone fiber linksBackbone fiber link
TDM / TDMATime slotsGuard time; needs syncGuard time; sync লাগেT1/E1, GSM (2G)
CDMACodesSame time and frequency; soft handoffএকই সময় আর frequency; soft handoffIS-95, 3G (WCDMA)
OFDM / OFDMAOrthogonal subcarriers (+ time)Orthogonal subcarrier (+ time)Overlapping subcarriers, no guard band; multipath-proofOverlap করা subcarrier, guard band নেই; multipath সহনশীলWi-Fi, 4G LTE, 5G
Exam tips: T1 = 1.544 Mbps (24 channels, 193-bit frame), E1 = 2.048 Mbps (32 slots, 30 voice). The "+1" in T1 is the framing bit — students often forget it and get 1.536 Mbps. FDM needs guard bands; OFDM does not. Frame duration in telephony is always 125 µs (because of 8000 samples/s). GSM = TDMA + FDMA; LTE = OFDMA.
Exam tip: T1 = 1.544 Mbps (24 channel, 193-bit frame), E1 = 2.048 Mbps (32 slot, 30 voice)। T1-এর "+1" হলো framing bit — student-রা প্রায়ই এটা ভুলে যায় আর 1.536 Mbps পায়। FDM-এ guard band লাগে; OFDM-এ লাগে না। Telephony-তে frame duration সবসময় 125 µs (কারণ প্রতি second-এ 8000 sample)। GSM = TDMA + FDMA; LTE = OFDMA।

Practice Questions (Admission Style)Practice Questions (Admission Style)

Q1–Q12 are IICT MCQ style (one correct option). Q13–Q20 are IICT written style (show every step). Try each one on paper before you open the answer.

Q1–Q12 হলো IICT MCQ style (একটা সঠিক option)। Q13–Q20 হলো IICT written style (প্রতিটা ধাপ দেখান)। Answer খোলার আগে প্রতিটা খাতায় নিজে চেষ্টা করুন।

Q1. (IICT MCQ style) What is the wavelength of a 300 MHz radio wave in free space?
  • (a) 0.1 m
  • (b) 1 m
  • (c) 10 m
  • (d) 100 m
Q1. (IICT MCQ style) Free space-এ 300 MHz radio wave-এর wavelength কত?
  • (a) 0.1 m
  • (b) 1 m
  • (c) 10 m
  • (d) 100 m
Show Answerউত্তর দেখুন
Answer: (b) — \( \lambda = c/f = 3\times10^8 / 3\times10^8 = 1 \) m. Remember: 300 MHz ↔ 1 m is a handy anchor; 3 GHz ↔ 10 cm, 30 MHz ↔ 10 m.
Answer: (b) — \( \lambda = c/f = 3\times10^8 / 3\times10^8 = 1 \) m। মনে রাখুন: 300 MHz ↔ 1 m একটা কাজের reference; 3 GHz ↔ 10 cm, 30 MHz ↔ 10 m।
Q2. (IICT MCQ style) An amplifier's output power is 1000 times its input power. Its gain in dB is:
  • (a) 3 dB
  • (b) 60 dB
  • (c) 30 dB
  • (d) 1000 dB
Q2. (IICT MCQ style) একটা amplifier-এর output power তার input power-এর 1000 গুণ। dB-তে gain কত?
  • (a) 3 dB
  • (b) 60 dB
  • (c) 30 dB
  • (d) 1000 dB
Show Answerউত্তর দেখুন
Answer: (c) — power ratio uses 10 log: \( 10\log_{10}1000 = 10 \times 3 = 30 \) dB. 60 dB would be the answer only if 1000 were a voltage ratio.
Answer: (c) — power ratio-তে 10 log: \( 10\log_{10}1000 = 10 \times 3 = 30 \) dB। 1000 যদি voltage ratio হতো, তবেই উত্তর 60 dB হতো।
Q3. (IICT MCQ style) The input voltage of an amplifier is 10 mV and the output voltage is 1 V (same impedance). The voltage gain in dB is:
  • (a) 20 dB
  • (b) 40 dB
  • (c) 100 dB
  • (d) 10 dB
Q3. (IICT MCQ style) একটা amplifier-এর input voltage 10 mV আর output voltage 1 V (impedance একই)। dB-তে voltage gain কত?
  • (a) 20 dB
  • (b) 40 dB
  • (c) 100 dB
  • (d) 10 dB
Show Answerউত্তর দেখুন
Answer: (b) — ratio = 1 V / 10 mV = 100. For voltage use 20 log: \( 20\log_{10}100 = 40 \) dB. The trap answer (a) 20 dB comes from wrongly using 10 log.
Answer: (b) — ratio = 1 V / 10 mV = 100। Voltage-এর জন্য 20 log: \( 20\log_{10}100 = 40 \) dB। ফাঁদের উত্তর (a) 20 dB আসে ভুল করে 10 log ব্যবহার করলে।
Q4. (IICT MCQ style) A 1 MHz carrier is amplitude modulated (standard AM) by a 4 kHz tone. The bandwidth of the AM signal is:
  • (a) 4 kHz
  • (b) 1 MHz
  • (c) 2 MHz
  • (d) 8 kHz
Q4. (IICT MCQ style) একটা 1 MHz carrier-কে 4 kHz tone দিয়ে amplitude modulate (standard AM) করা হলো। AM signal-এর bandwidth কত?
  • (a) 4 kHz
  • (b) 1 MHz
  • (c) 2 MHz
  • (d) 8 kHz
Show Answerউত্তর দেখুন
Answer: (d) — AM has sidebands at \( f_c \pm f_m \) = 996 kHz and 1004 kHz, so \( B = 2f_m = 8 \) kHz. The carrier frequency does not affect bandwidth. 4 kHz would be SSB.
Answer: (d) — AM-এর sideband থাকে \( f_c \pm f_m \) = 996 kHz আর 1004 kHz-এ, তাই \( B = 2f_m = 8 \) kHz। Carrier frequency bandwidth-কে প্রভাবিত করে না। 4 kHz হতো SSB-তে।
Q5. (IICT MCQ style) The maximum transmission efficiency of standard AM (DSB-FC) with a single tone is:
  • (a) 33.3%
  • (b) 50%
  • (c) 66.7%
  • (d) 100%
Q5. (IICT MCQ style) Single tone সহ standard AM (DSB-FC)-এর সর্বোচ্চ transmission efficiency কত?
  • (a) 33.3%
  • (b) 50%
  • (c) 66.7%
  • (d) 100%
Show Answerউত্তর দেখুন
Answer: (a) — \( \eta = m^2/(2+m^2) \). The largest allowed m without distortion is 1, so \( \eta = 1/3 = 33.3\% \). 66.7% is the part of power wasted in the carrier at m = 1 (and the saving of DSB-SC).
Answer: (a) — \( \eta = m^2/(2+m^2) \)। Distortion ছাড়া সবচেয়ে বড় m হলো 1, তাই \( \eta = 1/3 = 33.3\% \)। m = 1-এ carrier-এ যে power নষ্ট হয় সেটা 66.7% (আর এটাই DSB-SC-এর সাশ্রয়)।
Q6. (IICT MCQ style) Which line code has a transition in the middle of every bit, has no DC component, and is used in 10 Mbps Ethernet?
  • (a) NRZ-L
  • (b) Manchester
  • (c) NRZ-I
  • (d) AMI
Q6. (IICT MCQ style) কোন line code-এ প্রতিটা bit-এর মাঝখানে transition থাকে, DC component নেই, আর 10 Mbps Ethernet-এ ব্যবহার হয়?
  • (a) NRZ-L
  • (b) Manchester
  • (c) NRZ-I
  • (d) AMI
Show Answerউত্তর দেখুন
Answer: (b) — Manchester puts a mid-bit transition in every bit (self-clocking), and each bit spends half its time high and half low, so the average is zero (no DC). AMI also has no DC but has no transition for 0s; NRZ codes have neither property.
Answer: (b) — Manchester প্রতিটা bit-এর মাঝখানে transition রাখে (self-clocking), আর প্রতিটা bit অর্ধেক সময় high আর অর্ধেক low থাকে, তাই গড় শূন্য (DC নেই)। AMI-তেও DC নেই কিন্তু 0-এর জন্য কোনো transition নেই; NRZ code-এ দুটোর কোনোটাই নেই।
Q7. (IICT MCQ style) A T1 frame carries 24 voice channels of 8 bits each plus 1 framing bit, sent 8000 times per second. The T1 line rate is:
  • (a) 1.536 Mbps
  • (b) 2.048 Mbps
  • (c) 1.544 Mbps
  • (d) 64 kbps
Q7. (IICT MCQ style) একটা T1 frame-এ 8 bit করে 24টা voice channel আর 1টা framing bit থাকে, প্রতি second-এ 8000 বার পাঠানো হয়। T1 line rate কত?
  • (a) 1.536 Mbps
  • (b) 2.048 Mbps
  • (c) 1.544 Mbps
  • (d) 64 kbps
Show Answerউত্তর দেখুন
Answer: (c) — frame = 24 × 8 + 1 = 193 bits; rate = 193 × 8000 = 1,544,000 bps = 1.544 Mbps. (a) forgets the framing bit; (b) is E1; (d) is one DS0 channel.
Answer: (c) — frame = 24 × 8 + 1 = 193 bit; rate = 193 × 8000 = 1,544,000 bps = 1.544 Mbps। (a)-তে framing bit ভুলে যাওয়া হয়েছে; (b) হলো E1; (d) হলো একটা DS0 channel।
Q8. (IICT MCQ style) An FM signal has peak frequency deviation 50 kHz and the highest message frequency is 10 kHz. By Carson's rule, the bandwidth is about:
  • (a) 20 kHz
  • (b) 100 kHz
  • (c) 60 kHz
  • (d) 120 kHz
Q8. (IICT MCQ style) একটা FM signal-এর peak frequency deviation 50 kHz আর message-এর সবচেয়ে বেশি frequency 10 kHz। Carson's rule অনুযায়ী bandwidth প্রায় কত?
  • (a) 20 kHz
  • (b) 100 kHz
  • (c) 60 kHz
  • (d) 120 kHz
Show Answerউত্তর দেখুন
Answer: (d) — \( B \approx 2(\Delta f + f_m) = 2(50 + 10) = 120 \) kHz. Here \( \beta = 50/10 = 5 \) (wideband FM). (a) is the AM bandwidth, (b) is only \( 2\Delta f \), (c) forgets the factor 2.
Answer: (d) — \( B \approx 2(\Delta f + f_m) = 2(50 + 10) = 120 \) kHz। এখানে \( \beta = 50/10 = 5 \) (wideband FM)। (a) হলো AM bandwidth, (b) শুধু \( 2\Delta f \), (c)-তে factor 2 ভুলে যাওয়া হয়েছে।
Q9. (IICT MCQ style) The Nyquist sampling rate of \( x(t) = 2\cos(1000\pi t) + 5\sin(3000\pi t) \) is:
  • (a) 1500 Hz
  • (b) 3000 Hz
  • (c) 6000 Hz
  • (d) 3000π Hz
Q9. (IICT MCQ style) \( x(t) = 2\cos(1000\pi t) + 5\sin(3000\pi t) \)-এর Nyquist sampling rate কত?
  • (a) 1500 Hz
  • (b) 3000 Hz
  • (c) 6000 Hz
  • (d) 3000π Hz
Show Answerউত্তর দেখুন
Answer: (b) — convert ω to f: \( 1000\pi/2\pi = 500 \) Hz and \( 3000\pi/2\pi = 1500 \) Hz. \( f_{max} = 1500 \) Hz, so Nyquist rate = 2 × 1500 = 3000 Hz. (a) is only \( f_{max} \); (c) comes from doubling twice by mistake; (d) forgets to divide ω by 2π.
Answer: (b) — ω থেকে f: \( 1000\pi/2\pi = 500 \) Hz আর \( 3000\pi/2\pi = 1500 \) Hz। \( f_{max} = 1500 \) Hz, তাই Nyquist rate = 2 × 1500 = 3000 Hz। (a) শুধু \( f_{max} \); (c) আসে ভুল করে দুইবার দ্বিগুণ করলে; (d)-তে ω-কে 2π দিয়ে ভাগ করা হয়নি।
Q10. (IICT MCQ style) A modem uses 16-QAM at 2000 baud. Its bit rate is:
  • (a) 8000 bps
  • (b) 2000 bps
  • (c) 32000 bps
  • (d) 500 bps
Q10. (IICT MCQ style) একটা modem 2000 baud-এ 16-QAM ব্যবহার করে। এর bit rate কত?
  • (a) 8000 bps
  • (b) 2000 bps
  • (c) 32000 bps
  • (d) 500 bps
Show Answerউত্তর দেখুন
Answer: (a) — bits/symbol = \( \log_2 16 = 4 \). Bit rate = 2000 × 4 = 8000 bps. (c) wrongly multiplies by M = 16 instead of \( \log_2 M \). (b) confuses baud with bit rate.
Answer: (a) — প্রতি symbol-এ bit = \( \log_2 16 = 4 \)। Bit rate = 2000 × 4 = 8000 bps। (c)-তে ভুল করে \( \log_2 M \)-এর বদলে M = 16 দিয়ে গুণ করা হয়েছে। (b) baud আর bit rate গুলিয়ে ফেলেছে।
Q11. (IICT MCQ style) A channel has bandwidth 2 kHz and SNR = 31 (as a ratio). The Shannon capacity is:
  • (a) 4 kbps
  • (b) 62 kbps
  • (c) 10 kbps
  • (d) 20 kbps
Q11. (IICT MCQ style) একটা channel-এর bandwidth 2 kHz আর SNR = 31 (ratio হিসেবে)। Shannon capacity কত?
  • (a) 4 kbps
  • (b) 62 kbps
  • (c) 10 kbps
  • (d) 20 kbps
Show Answerউত্তর দেখুন
Answer: (c) — \( C = B\log_2(1+\text{SNR}) = 2000 \times \log_2 32 = 2000 \times 5 = 10{,}000 \) bps = 10 kbps. (d) uses the Nyquist factor 2B by mistake.
Answer: (c) — \( C = B\log_2(1+\text{SNR}) = 2000 \times \log_2 32 = 2000 \times 5 = 10{,}000 \) bps = 10 kbps। (d)-তে ভুল করে Nyquist-এর factor 2B ব্যবহার হয়েছে।
Q12. (IICT MCQ style) A 9 kHz sine wave is sampled at 12 kHz without an anti-aliasing filter. After reconstruction, the output tone will be at:
  • (a) 9 kHz
  • (b) 21 kHz
  • (c) 6 kHz
  • (d) 3 kHz
Q12. (IICT MCQ style) একটা 9 kHz sine wave-কে anti-aliasing filter ছাড়া 12 kHz-এ sample করা হলো। Reconstruction-এর পর output tone কোন frequency-তে হবে?
  • (a) 9 kHz
  • (b) 21 kHz
  • (c) 6 kHz
  • (d) 3 kHz
Show Answerউত্তর দেখুন
Answer: (d) — Nyquist needs \( 2 \times 9 = 18 \) kHz, but we used 12 kHz, so aliasing happens. The reconstruction filter passes only up to \( f_s/2 = 6 \) kHz. Alias = \( |9 - 12| = 3 \) kHz. So we hear 3 kHz, a tone that was never in the input.
Answer: (d) — Nyquist অনুযায়ী \( 2 \times 9 = 18 \) kHz লাগতো, কিন্তু আমরা 12 kHz ব্যবহার করেছি, তাই aliasing হবে। Reconstruction filter শুধু \( f_s/2 = 6 \) kHz পর্যন্ত pass করে। Alias = \( |9 - 12| = 3 \) kHz। তাই আমরা 3 kHz শুনব, যে tone input-এ কখনো ছিল না।
Q13. (IICT written style) An AM transmitter has an unmodulated carrier power of 400 W. It is modulated to a depth of 80% (m = 0.8) by a single tone. Find (a) the total transmitted power, (b) the power in each sideband, (c) the transmission efficiency, (d) the total power if m is raised to 1.
Q13. (IICT written style) একটা AM transmitter-এর unmodulated carrier power 400 W। একটা single tone দিয়ে 80% depth (m = 0.8)-এ modulate করা হলো। বের করুন (a) মোট transmitted power, (b) প্রতিটা sideband-এর power, (c) transmission efficiency, (d) m বাড়িয়ে 1 করলে মোট power।
Show Answerউত্তর দেখুন
Answer:
  • (a) \( P_t = P_c(1 + m^2/2) = 400(1 + 0.64/2) = 400 \times 1.32 = 528 \) W.
  • (b) Total sideband power \( = P_c m^2/2 = 400 \times 0.32 = 128 \) W, so each sideband = 64 W.
  • (c) \( \eta = 128/528 = 0.242 = 24.2\% \) (check: \( m^2/(2+m^2) = 0.64/2.64 = 24.2\% \)).
  • (d) \( P_t = 400 \times 1.5 = 600 \) W (efficiency becomes the maximum 33.3%).
The carrier (400 W) is still the largest part, and it carries no information — that is why DSB-SC and SSB were invented.
Answer:
  • (a) \( P_t = P_c(1 + m^2/2) = 400(1 + 0.64/2) = 400 \times 1.32 = 528 \) W।
  • (b) মোট sideband power \( = P_c m^2/2 = 400 \times 0.32 = 128 \) W, তাই প্রতিটা sideband = 64 W।
  • (c) \( \eta = 128/528 = 0.242 = 24.2\% \) (যাচাই: \( m^2/(2+m^2) = 0.64/2.64 = 24.2\% \))।
  • (d) \( P_t = 400 \times 1.5 = 600 \) W (efficiency হয় সর্বোচ্চ 33.3%)।
Carrier (400 W) এখনো সবচেয়ে বড় অংশ, আর এটা কোনো information বহন করে না — এই কারণেই DSB-SC আর SSB আবিষ্কার হয়েছে।
Q14. (IICT written style) An AM wave seen on an oscilloscope has a maximum peak-to-peak envelope of 24 V and a minimum peak-to-peak envelope of 8 V. (a) Find the modulation index. (b) Find the carrier and message amplitudes. (c) The antenna current without modulation is 8 A. Find the antenna current with this modulation.
Q14. (IICT written style) Oscilloscope-এ দেখা একটা AM wave-এর envelope-এর সর্বোচ্চ peak-to-peak 24 V আর সর্বনিম্ন peak-to-peak 8 V। (a) Modulation index বের করুন। (b) Carrier আর message-এর amplitude বের করুন। (c) Modulation ছাড়া antenna current 8 A। এই modulation-এ antenna current কত?
Show Answerউত্তর দেখুন
Answer:
  • (a) Peak values: \( V_{max} = 24/2 = 12 \) V, \( V_{min} = 8/2 = 4 \) V. \( m = (12-4)/(12+4) = 8/16 = 0.5 \). (Using peak-to-peak values directly gives the same m, because the ratio is the same.)
  • (b) \( A_c = (12+4)/2 = 8 \) V, \( A_m = (12-4)/2 = 4 \) V. Check \( A_m/A_c = 0.5 \). ✓
  • (c) \( I_t = I_c\sqrt{1 + m^2/2} = 8\sqrt{1.125} = 8 \times 1.0607 = 8.49 \) A.
Answer:
  • (a) Peak value: \( V_{max} = 24/2 = 12 \) V, \( V_{min} = 8/2 = 4 \) V। \( m = (12-4)/(12+4) = 8/16 = 0.5 \)। (সরাসরি peak-to-peak value দিয়েও একই m আসে, কারণ ratio একই।)
  • (b) \( A_c = (12+4)/2 = 8 \) V, \( A_m = (12-4)/2 = 4 \) V। যাচাই \( A_m/A_c = 0.5 \)। ✓
  • (c) \( I_t = I_c\sqrt{1 + m^2/2} = 8\sqrt{1.125} = 8 \times 1.0607 = 8.49 \) A।
Q15. (IICT written style) An FM transmitter has a peak frequency deviation of 60 kHz when the message is a 12 kHz tone. (a) Find β and the Carson bandwidth. (b) The message frequency changes to 24 kHz with the same amplitude. Find the new β and bandwidth. (c) Instead, the original message amplitude is doubled (frequency 12 kHz). Find β and bandwidth. (d) Is this narrowband or wideband FM?
Q15. (IICT written style) একটা FM transmitter-এর peak frequency deviation 60 kHz, যখন message একটা 12 kHz tone। (a) β আর Carson bandwidth বের করুন। (b) একই amplitude রেখে message frequency 24 kHz করা হলো। নতুন β আর bandwidth কত? (c) তার বদলে মূল message-এর amplitude দ্বিগুণ করা হলো (frequency 12 kHz)। β আর bandwidth কত? (d) এটা narrowband নাকি wideband FM?
Show Answerউত্তর দেখুন
Answer:
  • (a) \( \beta = 60/12 = 5 \). \( B = 2(60 + 12) = 144 \) kHz.
  • (b) \( \Delta f \) depends only on amplitude, so it stays 60 kHz. \( \beta = 60/24 = 2.5 \). \( B = 2(60 + 24) = 168 \) kHz.
  • (c) \( \Delta f = k_f A_m \) doubles to 120 kHz. \( \beta = 120/12 = 10 \). \( B = 2(120 + 12) = 264 \) kHz.
  • (d) β ≥ 2.5 in every case (much more than 1), so it is wideband FM.
Answer:
  • (a) \( \beta = 60/12 = 5 \)। \( B = 2(60 + 12) = 144 \) kHz।
  • (b) \( \Delta f \) শুধু amplitude-এর উপর নির্ভর করে, তাই 60 kHz-ই থাকে। \( \beta = 60/24 = 2.5 \)। \( B = 2(60 + 24) = 168 \) kHz।
  • (c) \( \Delta f = k_f A_m \) দ্বিগুণ হয়ে 120 kHz। \( \beta = 120/12 = 10 \)। \( B = 2(120 + 12) = 264 \) kHz।
  • (d) প্রতিটা ক্ষেত্রে β ≥ 2.5 (1-এর চেয়ে অনেক বেশি), তাই এটা wideband FM।
Q16. (IICT written style) A voice signal of 0–4 kHz, with range −2 V to +2 V, is sent by PCM. It is sampled 25% faster than the Nyquist rate, and the SQNR must be at least 40 dB. Find (a) the sampling rate, (b) the number of bits per sample and levels, (c) the bit rate, (d) the step size and maximum quantization error, (e) the minimum transmission bandwidth.
Q16. (IICT written style) 0–4 kHz-এর একটা voice signal, range −2 V থেকে +2 V, PCM দিয়ে পাঠানো হলো। Nyquist rate-এর চেয়ে 25% দ্রুত sample করা হয়, আর SQNR অন্তত 40 dB হতে হবে। বের করুন (a) sampling rate, (b) প্রতি sample-এ bit আর level সংখ্যা, (c) bit rate, (d) step size আর সর্বোচ্চ quantization error, (e) minimum transmission bandwidth।
Show Answerউত্তর দেখুন
Answer:
  • (a) Nyquist rate = 2 × 4 = 8 kHz. 25% more: \( f_s = 1.25 \times 8 = 10 \) kHz.
  • (b) \( 6.02n + 1.76 \ge 40 \Rightarrow n \ge 6.35 \Rightarrow n = 7 \) bits. \( L = 2^7 = 128 \) levels (SQNR ≈ 43.9 dB).
  • (c) \( R_b = n f_s = 7 \times 10{,}000 = 70 \) kbps.
  • (d) \( \Delta = 4/128 = 0.03125 \) V = 31.25 mV. Max error = \( \Delta/2 \approx 15.6 \) mV.
  • (e) \( B_{min} \approx R_b/2 = 35 \) kHz — much more than the 4 kHz analog signal. That is the price of going digital.
Answer:
  • (a) Nyquist rate = 2 × 4 = 8 kHz। 25% বেশি: \( f_s = 1.25 \times 8 = 10 \) kHz।
  • (b) \( 6.02n + 1.76 \ge 40 \Rightarrow n \ge 6.35 \Rightarrow n = 7 \) bit। \( L = 2^7 = 128 \) level (SQNR ≈ 43.9 dB)।
  • (c) \( R_b = n f_s = 7 \times 10{,}000 = 70 \) kbps।
  • (d) \( \Delta = 4/128 = 0.03125 \) V = 31.25 mV। সর্বোচ্চ error = \( \Delta/2 \approx 15.6 \) mV।
  • (e) \( B_{min} \approx R_b/2 = 35 \) kHz — 4 kHz analog signal-এর চেয়ে অনেক বেশি। Digital হওয়ার দাম এটাই।
Q17. (IICT written style) Encode the bit stream 01001110 using (a) NRZ-L (1 = high), (b) NRZ-I (start low), (c) AMI (first 1 positive), (d) Manchester (IEEE 802.3), (e) Differential Manchester (line high before the first bit). Write each bit as a level (+, −, 0) or as a half-bit pair (H/L). Which of these codes will lose clock sync on a long run of zeros?
Q17. (IICT written style) Bit stream 01001110-কে encode করুন: (a) NRZ-L (1 = high), (b) NRZ-I (low থেকে শুরু), (c) AMI (প্রথম 1 positive), (d) Manchester (IEEE 802.3), (e) Differential Manchester (প্রথম bit-এর আগে line high)। প্রতিটা bit-কে একটা level (+, −, 0) অথবা half-bit জোড়া (H/L) হিসেবে লিখুন। এর মধ্যে কোন code গুলো লম্বা শূন্যের ধারায় clock sync হারাবে?
Show Answerউত্তর দেখুন
Answer: (bits: 0 1 0 0 1 1 1 0)
  • (a) NRZ-L: − + − − + + + −
  • (b) NRZ-I: each 1 flips the level, starting from low → − + + + − + − − (four 1s → 4 transitions).
  • (c) AMI: 0 + 0 0 − + − 0 (the 1s alternate +, −, +, −).
  • (d) Manchester (0 = H→L, 1 = L→H): HL LH HL HL LH LH LH HL.
  • (e) Differential Manchester (0 = change at start, 1 = no change; always change in the middle): LH HL HL HL LH HL LH LH.
Clock loss on long zeros: NRZ-L, NRZ-I and AMI (no transitions during 0s). Manchester and Differential Manchester always have a mid-bit transition, so they never lose sync. (AMI is fixed with B8ZS/HDB3 scrambling.)
Answer: (bit: 0 1 0 0 1 1 1 0)
  • (a) NRZ-L: − + − − + + + −
  • (b) NRZ-I: প্রতিটা 1 level উল্টায়, low থেকে শুরু → − + + + − + − − (চারটা 1 → 4টা transition)।
  • (c) AMI: 0 + 0 0 − + − 0 (1 গুলো পালা করে +, −, +, −)।
  • (d) Manchester (0 = H→L, 1 = L→H): HL LH HL HL LH LH LH HL।
  • (e) Differential Manchester (0 = শুরুতে পরিবর্তন, 1 = পরিবর্তন নেই; মাঝখানে সবসময় পরিবর্তন): LH HL HL HL LH HL LH LH।
লম্বা শূন্যে clock হারায়: NRZ-L, NRZ-I আর AMI (0-এর সময় কোনো transition নেই)। Manchester আর Differential Manchester-এ সবসময় bit-এর মাঝখানে transition থাকে, তাই কখনো sync হারায় না। (AMI-কে B8ZS/HDB3 scrambling দিয়ে ঠিক করা হয়।)
Q18. (IICT written style) A channel has bandwidth 2 MHz and SNR = 255. (a) Find the Shannon capacity. (b) Express the SNR in dB. (c) For safety we decide to send at 12 Mbps. How many signal levels are needed (use Nyquist)? (d) Why can't we simply use 1024 levels to go faster?
Q18. (IICT written style) একটা channel-এর bandwidth 2 MHz আর SNR = 255। (a) Shannon capacity বের করুন। (b) SNR-কে dB-তে লিখুন। (c) নিরাপত্তার জন্য আমরা 12 Mbps-এ পাঠাব ঠিক করলাম। কতটা signal level লাগবে (Nyquist ব্যবহার করুন)? (d) দ্রুত যেতে আমরা সোজা 1024 level ব্যবহার করতে পারি না কেন?
Show Answerউত্তর দেখুন
Answer:
  • (a) \( C = 2\times10^6 \log_2(1 + 255) = 2\times10^6 \times 8 = 16 \) Mbps.
  • (b) \( 10\log_{10}255 \approx 24.1 \) dB.
  • (c) \( 12\times10^6 = 2 \times 2\times10^6 \times \log_2 M \Rightarrow \log_2 M = 3 \Rightarrow M = 8 \) levels.
  • (d) Nyquist with 1024 levels would give \( 2 \times 2\text{M} \times 10 = 40 \) Mbps, but Shannon says this channel can never carry more than 16 Mbps without errors. With the given noise, 1024 levels are too close together to tell apart. Shannon (noise) sets the real limit.
Answer:
  • (a) \( C = 2\times10^6 \log_2(1 + 255) = 2\times10^6 \times 8 = 16 \) Mbps।
  • (b) \( 10\log_{10}255 \approx 24.1 \) dB।
  • (c) \( 12\times10^6 = 2 \times 2\times10^6 \times \log_2 M \Rightarrow \log_2 M = 3 \Rightarrow M = 8 \) level।
  • (d) 1024 level দিয়ে Nyquist দিত \( 2 \times 2\text{M} \times 10 = 40 \) Mbps, কিন্তু Shannon বলছে এই channel error ছাড়া কখনোই 16 Mbps-এর বেশি বহন করতে পারবে না। এই noise-এ 1024টা level এত কাছাকাছি যে আলাদা করে চেনা যায় না। আসল সীমা ঠিক করে Shannon (noise)।
Q19. (IICT written style) A receiver works at T = 290 K with bandwidth 10 MHz. The received signal power is −80 dBm. (k = 1.38 × 10⁻²³ J/K.) Find (a) the thermal noise power in watts and in dBm, (b) the SNR in dB and as a ratio, (c) the Shannon capacity of the link.
Q19. (IICT written style) একটা receiver T = 290 K-এ, bandwidth 10 MHz-এ কাজ করে। Received signal power −80 dBm। (k = 1.38 × 10⁻²³ J/K।) বের করুন (a) watt আর dBm-এ thermal noise power, (b) dB-তে আর ratio হিসেবে SNR, (c) link-এর Shannon capacity।
Show Answerউত্তর দেখুন
Answer:
  • (a) \( N = kTB = 1.38\times10^{-23} \times 290 \times 10^7 = 4.0\times10^{-14} \) W. In dBm: \( 10\log(4.0\times10^{-14}/10^{-3}) \approx -104 \) dBm. (Shortcut: \( -174 + 10\log 10^7 = -174 + 70 = -104 \) dBm.)
  • (b) SNR(dB) = signal (dBm) − noise (dBm) = \( -80 - (-104) = 24 \) dB. Ratio = \( 10^{2.4} \approx 250 \).
  • (c) \( C = 10^7 \times \log_2(1 + 250) = 10^7 \times 7.97 \approx 79.7 \) Mbps ≈ 80 Mbps. Shortcut check: \( 10\text{ MHz} \times 24/3 = 80 \) Mbps. ✓
Note: subtracting two dBm values gives a dB ratio — that is allowed. Adding two dBm values is not.
Answer:
  • (a) \( N = kTB = 1.38\times10^{-23} \times 290 \times 10^7 = 4.0\times10^{-14} \) W। dBm-এ: \( 10\log(4.0\times10^{-14}/10^{-3}) \approx -104 \) dBm। (Shortcut: \( -174 + 10\log 10^7 = -174 + 70 = -104 \) dBm।)
  • (b) SNR(dB) = signal (dBm) − noise (dBm) = \( -80 - (-104) = 24 \) dB। Ratio = \( 10^{2.4} \approx 250 \)।
  • (c) \( C = 10^7 \times \log_2(1 + 250) = 10^7 \times 7.97 \approx 79.7 \) Mbps ≈ 80 Mbps। Shortcut দিয়ে যাচাই: \( 10\text{ MHz} \times 24/3 = 80 \) Mbps। ✓
খেয়াল করুন: দুইটা dBm বিয়োগ করলে একটা dB ratio পাওয়া যায় — এটা চলে। কিন্তু দুইটা dBm যোগ করা চলে না।
Q20. (IICT written style) A cellular operator has 25 MHz of spectrum. Each full-duplex voice channel uses two 25 kHz simplex channels. The system uses a 7-cell cluster. (a) How many duplex channels are there in total? (b) How many channels does each cell get? (c) Find the co-channel reuse ratio D/R. (d) If the service area has 5 clusters, how many calls can the system carry at once? (e) What happens to capacity and interference if N is changed to 4?
Q20. (IICT written style) একটা cellular operator-এর কাছে 25 MHz spectrum আছে। প্রতিটা full-duplex voice channel দুইটা 25 kHz simplex channel ব্যবহার করে। System 7-cell cluster ব্যবহার করে। (a) মোট কতটা duplex channel আছে? (b) প্রতিটা cell কতটা channel পায়? (c) Co-channel reuse ratio D/R বের করুন। (d) Service area-তে 5টা cluster থাকলে system একসাথে কতটা call বহন করতে পারবে? (e) N বদলে 4 করলে capacity আর interference-এর কী হবে?
Show Answerউত্তর দেখুন
Answer:
  • (a) One duplex channel = 2 × 25 = 50 kHz. Total = 25,000 kHz / 50 kHz = 500 channels.
  • (b) 500 / 7 ≈ 71.4 → about 71 channels per cell (three cells get 72, so 4 × 71 + 3 × 72 = 500).
  • (c) \( D/R = \sqrt{3N} = \sqrt{21} \approx 4.58 \).
  • (d) Each cluster uses all 500 channels once. 5 clusters → 5 × 500 = 2500 simultaneous calls. This is the power of frequency reuse.
  • (e) N = 4: 500/4 = 125 channels per cell, and 5 × 7 = 35 cells would now form about 8.75 clusters → 35 × 125 = 4375 calls instead of 2500. But \( D/R = \sqrt{12} \approx 3.46 \), so co-channel cells are closer → more interference. Smaller N = more capacity, more interference.
Answer:
  • (a) একটা duplex channel = 2 × 25 = 50 kHz। মোট = 25,000 kHz / 50 kHz = 500টা channel।
  • (b) 500 / 7 ≈ 71.4 → প্রতি cell-এ প্রায় 71টা channel (তিনটা cell পায় 72টা, তাই 4 × 71 + 3 × 72 = 500)।
  • (c) \( D/R = \sqrt{3N} = \sqrt{21} \approx 4.58 \)।
  • (d) প্রতিটা cluster সব 500টা channel একবার করে ব্যবহার করে। 5টা cluster → 5 × 500 = 2500টা call একসাথে। এটাই frequency reuse-এর শক্তি।
  • (e) N = 4: প্রতি cell-এ 500/4 = 125টা channel, আর একই 5 × 7 = 35টা cell এখন প্রায় 8.75টা cluster বানাবে → 2500-এর বদলে 35 × 125 = 4375টা call। কিন্তু \( D/R = \sqrt{12} \approx 3.46 \), তাই co-channel cell গুলো কাছাকাছি → বেশি interference। ছোট N = বেশি capacity, বেশি interference।